Methods for Characterizing the 3‐D Morphology of Polymer Composites
Authors:
- 1 May 2012
- journal article
- research article
- Published by Wiley in Macromolecular Symposia
- Vol. 315 (1) , 115-124
Abstract
3‐dimensional visualization of polymer morphology is of increasing interest in the polymer community because it provides a deeper insight into the arrangement of the phases in heterophasic polymeric materials, for example in composites. Depending on the size of the fillers, an adequate method offering a good compromise between suitable resolution and observable volume must be selected.Different polypropylene composites filled with long glass fibres, mica and talcum particles were investigated. Four methods were applied to account for the different filler sizes. For composites containing fillers larger than several micrometers, i.e. glass fibres and mica particles, X‐ray tomography offers a very good combination of visibility and volume. Serial sectioning by polishing in combination with light optical microscopy can be an alternative if no X‐ray equipment is available. This combined method has the disadvantage, however, that the imaged volume is smaller and involves more effort, which makes it unsuitable for routine observations. The much smaller talcum particles with thicknesses down to 200 nm were investigated by coupling focused ion beam (FIB) milling and scanning electron microscopy (SEM) and by insitu ultramicrotomy in the SEM. Both methods led to good and comparable results.Keywords
This publication has 14 references indexed in Scilit:
- Evaluation of Computed Tomography Data from Fibre Reinforced Polymers to Determine Fibre Length DistributionInternational Polymer Processing, 2011
- The investigation of inner structural damage of UV and heat degraded polymer composites using X-ray micro CTComposites Part A: Applied Science and Manufacturing, 2011
- Characterization of acoustically engineered polymer nanocomposite metamaterials using x-ray microcomputed tomographyReview of Scientific Instruments, 2011
- A new possibility for microstructural investigation of clay-based polymer nanocomposite by focused ion beam tomographyPolymer, 2010
- Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography AnalysisJournal of Cellular Plastics, 2009
- Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomographyActa Materialia, 2009
- A method to study the dispersion and orientation of nanoclay tactoids in PET matrix-focused ion beam milling combined with electron microscopyMaterials Letters, 2008
- FIB-SEM and TEMT Observation of Highly Elastic Rubbery Material with Nanomatrix StructureMacromolecules, 2008
- Three‐dimensional structural analysis of a block copolymer by scanning electron microscopy combined with a focused ion beamJournal of Polymer Science Part B: Polymer Physics, 2007
- Finite element modelling of the actual structure of cellular materials determined by X-ray tomographyActa Materialia, 2005