Bus-Clamping-Based DTC: An Attempt to Reduce Harmonic Distortion and Switching Losses
Authors:
- 29 February 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 60 (3) , 873-884
Abstract
This paper deals with a new direct torque control (DTC) strategy based on the bus-clamping technique dedicated to induction motor drives. The proposed strategy consists in the synthesis of two vector selection tables suitably arranged considering the bus-clamping technique. Such synthesis depends on the rotation direction of the stator flux vector. The resulting DTC strategy leads to clamp each motor phase during 60° interval in every half cycle of the reference stator flux vector. Therefore, a reduction of the inverter switching losses is gained. Furthermore, it has been found that the proposed DTC strategy offers a lower harmonic distortion of the motor phase currents and a higher capability to operate at low levels of the dc-bus voltage, which could be of interest for electric vehicle (EV) and hybrid electric vehicle (HEV) applications. These performances are confirmed by simulation and validated by experiments.Keywords
This publication has 22 references indexed in Scilit:
- Novel Switching Sequences for a Space-Vector-Modulated Three-Level InverterIEEE Transactions on Industrial Electronics, 2011
- Simple Dynamic Overmodulation Strategy for Fast Torque Control in DTC of Induction Machines With Constant-Switching-Frequency ControllerIEEE Transactions on Industry Applications, 2011
- A Novel Duty Cycle Control Strategy to Reduce Both Torque and Flux Ripples for DTC of Permanent Magnet Synchronous Motor Drives With Switching Frequency ReductionIEEE Transactions on Power Electronics, 2011
- Comparative Analysis of Discontinuous and Continuous PWM Techniques in VSI-Fed Five-Phase Induction MotorIEEE Transactions on Industrial Electronics, 2011
- A Simple Method to Reduce Torque Ripple in Direct Torque-Controlled Permanent-Magnet Synchronous Motor by Using Vectors With Variable Amplitude and AngleIEEE Transactions on Industrial Electronics, 2010
- Low-Speed Control Improvements for a Two-Level Five-Phase Inverter-Fed Induction Machine Using Classic Direct Torque ControlIEEE Transactions on Industrial Electronics, 2010
- Novel Direct Torque Control Based on Space Vector Modulation With Adaptive Stator Flux Observer for Induction MotorsIEEE Transactions on Magnetics, 2010
- Implementation of a new fast direct torque control algorithm for induction motor drivesIET Electric Power Applications, 2010
- Global Minimum Torque Ripple Design for Direct Torque Control of Induction Motor DrivesIEEE Transactions on Industrial Electronics, 2009
- Three-Dimensional Space-Vector Modulation to Reduce Common-Mode Voltage for Multilevel InverterIEEE Transactions on Industrial Electronics, 2009