Wear behavior of plasma nitrided AISI 420 stainless steel
Authors:
- 1 July 2008
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 99 (7) , 779-786
Abstract
Martensitic AISI 420 stainless steel was plasma nitrided using a DC N2 – H2 pulsed discharge, after thermal treatment at two different tempering temperatures. Sliding wear behavior was determined by means of a ball-on-disk tribometer at room temperature and without lubrication. Wear volume was calculated from the information provided by an optical profilometer and wear scars were analyzed by Scanning Electron Microscopy. The results indicated that the nitrided samples exhibited improved wear resistance when compared to the untreated specimens, but corrosion resistance was diminished due to the presence of the outer nitrided layer. However, when this layer was removed mechanically considerable improvement in the corrosion resistance was achieved without impairing the wear resistance of the whole system, which was 200 % higher compared to the wear resistance of the non-nitrided specimens.Keywords
This publication has 14 references indexed in Scilit:
- Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steelWear, 2004
- Characteristics of martensitic stainless steel nitrided in a low-pressure RF plasmaSurface and Coatings Technology, 2003
- A study of martensitic stainless steel AISI 420 modified using plasma nitridingSurface and Coatings Technology, 2002
- Surface hardening by plasma nitriding on high chromium alloy steelJournal of Materials Science Letters, 2001
- Improvement of the mechanical properties of austenitic stainless steel after plasma nitridingSurface and Coatings Technology, 2000
- The nature of expanded austeniteSurface and Coatings Technology, 2000
- Low-temperature plasma-assisted nitridingSurface and Coatings Technology, 2000
- Effect of lubrication by mineral and synthetic oils on the sliding wear of plasma nitrided AISI 410 stainless steelWear, 1998
- Observation of a compound layer with very low friction coefficient in ion-nitrided martensitic 410 stainless steelSurface and Coatings Technology, 1998
- Progress in the analysis of the mechanisms of ion nitridingSurface and Coatings Technology, 1995