Cross-section optimization of thin-walled open-section composite column for maximizing its ultimate strength
- 12 October 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 236 (2) , 413-428
Abstract
This paper focuses on the optimization of thin-walled open cross-section laminated composite column subjected to uniaxial compressive load. The cross-section of the column is parameterized in such a way that it can represent a variety of shapes including most of the regular cross-sections such as H, C, T, and I sections. The objective is to obtain the best possible shape of the cross-section, by keeping a constant total material volume, which can maximize the ultimate load carrying capacity of the column. The ultimate strength of the column is determined by considering both buckling instability and material failure. For material failure, Tsai-Wu composite failure criterion is considered. As analytical solutions for these parameterized column models are not tractable, the ultimate loads of the composite columns are computed through finite-element analysis in ANSYS. And, the optimization is carried out by coupling these finite-element results with a genetic algorithm based optimization scheme developed in MATLAB. The optimal result obtained through this study is compared with an equivalent base model of cruciform cross-section. Results are reported for various lengths and boundary conditions of the columns. The comparison shows that a substantial increase of the ultimate load, as high as 610%, can be achieved through this optimization study. Thus, the present paper highlights some important characteristics of open cross-sections that can be useful in the design of thin-walled laminated column structures.Keywords
Funding Information
- Anusandhan National Research Foundation (ECR/2016/000964)
This publication has 29 references indexed in Scilit:
- Buckling and postbuckling behaviour of thin-walled composite channel section columnComposite Structures, 2013
- Stability analysis of composite columns and parameter optimization against bucklingComposites Part B: Engineering, 2011
- Torsional and flexural buckling of composite FRP columns with cruciform sections considering local instabilitiesComposite Structures, 2011
- Cross-section optimal design of composite laminated thin-walled beamsComputers & Structures, 2011
- Flexural–torsional buckling loads for spatially coupled stability analysis of thin-walled composite columnsAdvances in Engineering Software, 2008
- Optimization of composite I-sections using fiber angles as design variablesComposite Structures, 2001
- Flexural–torsional buckling of thin-walled I-section compositesComputers & Structures, 2001
- Multiobjective optimisation of laminated I-beams for maximum crippling, buckling and postbuckling strengthComposites Part B: Engineering, 1998
- Optimal design of a composite I-beamComposite Structures, 1994
- A General Theory of Strength for Anisotropic MaterialsJournal of Composite Materials, 1971