A Modified DPWM Method With Minimal Line Current Ripple and Zero-Sequence Circulating Current for Two Parallel Interleaved 2L-VSIs
- 2 December 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (12) , 11879-11889
Abstract
High-performance comprehensive optimization of line current ripple, zero-sequence circulating current (ZSCC), and switching losses is a challenge for parallel interleaved inverters. This article proposes a modified discontinuous pulse width modulation (PWM) method for two parallel interleaved two-level voltage-source inverters (2L-VSIs), which are regarded as a single 3L-VSI to optimize its vector sequence. The line current ripple is the priority optimization target to guarantee the principle of the nearest three vectors is applied in each subsector. To reduce the ZSCC and switching losses, the vector combinations with smaller changing rate of ZSCC are selected, and the phase-leg carrying the highest current is clamped. The detailed design procedure of 3L-vector sequence and how to distribute to 2L-VSIs are revealed. The quantitative performance comparison between the proposed PWM method and existing ones in terms of line current ripple, ZSCC, and switching losses are made. Experimental results confirm the effectiveness of the proposed method.Keywords
Funding Information
- National Natural Science Foundation of China (51777084)
This publication has 28 references indexed in Scilit:
- A Novel Carrier-Based Hybrid PWM Technique for Minimization of Line Current Ripple in Two Parallel Interleaved Two-Level VSIsIEEE Transactions on Industrial Electronics, 2017
- A 60-kW 3-kW/kg Five-Level T-Type SiC PV Inverter With 99.2% Peak EfficiencyIEEE Transactions on Industrial Electronics, 2017
- Suppressing Zero-Sequence Circulating Current of Modular Interleaved Three-Phase Converters Using Carrier Phase Shift PWMIEEE Transactions on Industry Applications, 2017
- A Coordinate Control Strategy for Circulating Current Suppression in Multiparalleled Three-Phase InvertersIEEE Transactions on Industrial Electronics, 2016
- A Three-Level Space Vector Modulation Scheme for Paralleled Converters to Reduce Circulating Current and Common-Mode VoltageIEEE Transactions on Power Electronics, 2016
- An Integrated Inductor for Parallel Interleaved VSCs and PWM Schemes for Flux MinimizationIEEE Transactions on Industrial Electronics, 2015
- Modified Discontinuous PWM for Size Reduction of the Circulating Current Filter in Parallel Interleaved ConvertersIEEE Transactions on Power Electronics, 2014
- Minimization of Grid Current Distortion in Parallel-Connected Converters Through Carrier InterleavingIEEE Transactions on Industrial Electronics, 2013
- Modeling and Analysis of the Dead-Time Effects in Parallel PWM Two-Level Three-Phase Voltage-Source InvertersIEEE Transactions on Power Electronics, 2009
- Simple analytical and graphical methods for carrier-based PWM-VSI drivesIEEE Transactions on Power Electronics, 1999