Air-isolated through-wafer interconnects for microsystem applications
Authors:
- 23 April 2004
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1067-1070 vol.2
Abstract
This paper reports a through-wafer interconnect structure using air-isolated p/sup ++/ silicon columns suspended by metal beams. The approach minimizes parasitic capacitance and does not require the lightly-doped wafers and DC bias associated with pn-junction isolation. The interconnects are therefore well suited for use in battery-operated microsystems. The through-wafer conductors have a calculated series resistance of approximately 5 /spl Omega/ and a capacitance to the substrate of 10 fF. Including the metal support frame, the area of each feedthrough is 0.01 mm/sup 2/, and using clustered columns, the per-feedthrough area is still smaller.Keywords
This publication has 8 references indexed in Scilit:
- An all-capacitive sensing chip for temperature, absolute pressure, and relative humidity2004
- Field-operable microconnections using automatically-triggered localized solder-bonding2003
- Feasibility study on through-wafer interconnecting method for hybrid wafer-scale-integration2002
- Fabrication technology for wafer through-hole interconnections and three-dimensional stacks of chips and wafers2002
- Process compatible polysilicon-based electrical through-wafer interconnects in silicon substratesJournal of Microelectromechanical Systems, 2002
- Through-wafer electrical interconnects by sidewall photolithographic patterning2002
- Fabrication of thick silicon dioxide sacrificial and isolation blocks in a silicon substrateJournal of Micromechanics and Microengineering, 2001
- A monolithic pressure-pH sensor for esophageal studies1982