Interferometric Surface Analysis of a Phase-Only Spatial Light Modulator for Surface Deformation Compensation
Open Access
Abstract
A spatial light modulator (SLM) is a key element in several applications, but it is subject to surface deformation due to manufacturing imperfections or environmental factors. Therefore, the current study aims to analyze and compensate for such deformations in a phase-only SLM using a Michelson interferometer. The recorded interferogram represents the interference between the wavefront reflected from the SLM surface (object wave) and a reference wave. Noise in the recorded interferogram can degrade the accuracy of phase measurements. Various digital filtering techniques were applied to improve the signal-to-noise ratio (SNR) of the interferogram. The filtered interferogram enabled accurate phase extraction through Fourier transform processing and side peak selection using a spatial carrier frequency method. Additionally, phase errors caused by the tilt of the reference beam were corrected. Thereafter, the conjugate of the corrected phase distribution was used to calculate a phase-only computer-generated hologram (CGH), which was displayed on the SLM to compensate for surface deformations. The effectiveness of the proposed compensation procedure was confirmed by a second phase measurement, which demonstrated improved SLM performance. This study highlights the impact of combining the interferometric techniques with digital processing for precise surface deformation analysis.Keywords
This publication has 35 references indexed in Scilit:
- Adaptive optics-based wavefront-enhanced laser-induced fluorescence (WELIF) for improved analytical performanceAnalytical Methods, 2022
- In situ calibration for a phase-only spatial light modulator based on digital holographyOptical Engineering, 2020
- Rapid phase calibration of a spatial light modulator using novel phase masks and optimization of its efficiency using an iterative algorithmJournal of Modern Optics, 2020
- A review of interferometry for geometric measurementMeasurement Science and Technology, 2018
- In situ process monitoring in selective laser sintering using optical coherence tomographyOptical Engineering, 2018
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and propertiesProgress in Materials Science, 2015
- Efficient and accurate laser shaping with liquid crystal spatial light modulatorsApplied Physics Letters, 2014
- Phase retrieval for optical inspection of technical componentsJournal of Optics, 2012
- Telecommunications Applications of LCOS DevicesMolecular Crystals and Liquid Crystals, 2002
- Active phase‐shifting interferometers for shape and deformation measurementsOptical Engineering, 1996