Improving low load combustion, stability, and emissions in pilot-ignited natural gas engines
Authors:
- 1 February 2006
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 220 (2) , 229-239
Abstract
Stringent environmental policies and the ever-increasing demand for energy have triggered interest in novel combustion technologies that use alternative fuels as energy sources. Of these, pilot-ignited natural gas engines that employ small diesel pilots (∼1-5 per cent on an energy basis) to compression ignite a premixed natural gas-air mixture have received considerable attention. This paper discusses the effect of intake charge temperature and pilot injected quantity on the onset of ignition (ΔIGN) and combustion (ΔCOM) in a pilot-ignited natural gas engine with specific focus on early diesel pilot injection [begining of injection (BOI) at about 60° before top dead centre (BTDC)] for low-load operation. Both ΔIGN and ΔCOM had a strong influence on performance and emissions at 60° BTDC. At advanced BOI for both half and quarter-load operation, the best performance and hydrocarbon (HC) emissions could be obtained by optimally advancing ΔIGN relative to TDC and minimizing the cyclic variability in the ΔIGN. Furthermore, a clear dependence of ΔCOM on ΔIGN was observed with the optimally advanced and the least-variable ΔIGN producing the least ΔCOM variations. Engine performance, stability, and emissions were more sensitive to intake charge temperatures in comparison with pilot injected quantities. The best improvement in performance and emissions was obtained with increasing intake temperature at half load, where fuel conversion efficiency (FCE) increased from approximately 31 per cent to 38 per cent, coefficient of variation of indicated mean effective pressure (COVIMEP) decreased from about 11 per cent to 4 per cent, and HC emissions decreased from 72 to 23 g/kW h, while oxides of nitrogen (NOx) emissions increased from 16 to 142 mg/kW h. Performance and emissions trends at quarter load were similar to those observed at half load.Keywords
This publication has 19 references indexed in Scilit:
- Effect of pilot injection timing, pilot quantity and intake charge conditions on performance and emissions for an advanced low-pilot-ignited natural gas engineInternational Journal of Engine Research, 2004
- The Advanced Injection Low Pilot Ignited Natural Gas Engine: A Combustion AnalysisJournal of Engineering for Gas Turbines and Power, 2004
- Strategies for Reduced NOx Emissions in Pilot-Ignited Natural Gas EnginesJournal of Engineering for Gas Turbines and Power, 2003
- A comparative study between diesel and dual-fuel engines: Performance and emissionsCombustion Science and Technology, 2002
- Effect of pilot fuel quantity on the performance of a dual fuel engineEnergy Conversion and Management, 2000
- The inevitability of engine-out NOx emissions from spark-ignited and diesel enginesProceedings of the Combustion Institute, 2000
- Homogeneous Charge Compression Ignition (HCCI): Benefits, Compromises, and Future Engine ApplicationsSAE International Journal of Advances and Current Practices in Mobility, 1999
- Development of a High-Output Dual-Fuel EngineJournal of Engineering for Gas Turbines and Power, 1993
- Development of the Cooper-Bessemer CleanBurn™ Gas-Diesel (Dual-Fuel) EngineJournal of Engineering for Gas Turbines and Power, 1992
- Single-Cylinder Testing of a High-Pressure Electronic Pilot Fuel Injector for Low NOx Emission Dual Fuel Engines: Part II—Optimization, Startability, and Inflammability TestingJournal of Engineering for Gas Turbines and Power, 1990