Analytical model for the optimization of locally contacted solar cells
Authors:
- 10 August 2005
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01608371,p. 999-1002
Abstract
An empiric analytical model is presented that describes both, the diode saturation current j/sub 0/ and the dark series resistance R/sub s/ of the passivated and locally contacted rear side of solar cells. The model is experimentally verified for both, point and stripe contacts. Metallization fractions from 1.0% to 50% are realized in the experiments. The measured values of j/sub 0/ and R/sub s/ fit the theory within the error of the measurement. We use the modelled j/sub 0/ and R/sub s/ in a one-dimensional simulation of the solar cell performance, to optimize the rear contact geometry for maximum efficiency.Keywords
This publication has 5 references indexed in Scilit:
- Analytical model for the diode saturation current of point-contacted solar cellsProgress in Photovoltaics: Research and Applications, 2005
- Low‐temperature formation of local Al contacts to a‐Si:H‐passivated Si wafersProgress in Photovoltaics: Research and Applications, 2004
- 24·5% Efficiency silicon PERT cells on MCZ substrates and 24·7% efficiency PERL cells on FZ substratesProgress in Photovoltaics: Research and Applications, 1999
- Spatially resolved analysis and minimization of resistive losses in high-efficiency Si solar cellsProgress in Photovoltaics: Research and Applications, 1996
- Disk and stripe capacitancesSolid-State Electronics, 1995