Proton exchange membrane (PEM) water electrolyzers rely on relatively expensive Ir-based catalysts for efficient and durable hydrogen production. To reduce system costs, Ir loadings can be reduced if performance and durability are maintained. In this talk, our progress in advancing porous transport electrode (PTE) anodes will be discussed. We develop sputter deposition as readily scalable method to synthesize uniform, low-loading catalyst layers with controlled composition of metallic Ir as well as amorphous and rutile Ir oxides. The catalyst coating, applied directly to the porous transport layer, can have advantages for performance, manufacturing simplicity, and catalyst recovery. The activity and durability of these materials in the PTE architecture is evaluated. We first show that suitable porous transport layer porosity can minimize activity losses when reducing loadings. The metallic Ir and amorphous IrOx have better initial activity, however, operation at 3 A cm−2 with 0.1 mg Ir cm−2 shows that only rutile IrO2 maintains performance beyond 100 h with a 50-mV improvement after 700 h. Additionally, a >10x reduced dissolution rate is shown for rutile IrO2. With a low-porosity transport layer and 0.4 mg Ir cm−2, a steady-state voltage decay rate of 6 microV h−1 is achieved. The results demonstrate that sputter-deposited rutile IrO2 porous transport electrodes with low Ir loading can be operated at high current density to reduce hydrogen production costs.