Preparation of MEA with the Polybenzimidazole Membrane for High Temperature PEM Fuel Cell
- 1 January 2011
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 14 (3) , B38-B40
Abstract
A polybenzimidazole (PBI)-based catalyst-coated membrane (CCM) as a membrane electrode assembly (MEA) in a high temperature polymer electrolyte membrane (PEM) fuel cell was fabricated by spraying catalyst ink containing PBI ionomer on both sides of a PBI membrane, which was then soaked in 85% (phosphoric acid, PA). The performance of PA-doped CCM was two times higher than that of a conventional PA-doped catalyst-coated substrate as MEA, which was fabricated by a complex process involving fabricating gas diffusion electrodes and a hot-pressing process. The PA-doped CCM structure showed improved performance under nonhumidification and at .Keywords
This publication has 11 references indexed in Scilit:
- High temperature proton exchange membranes based on polybenzimidazoles for fuel cellsProgress in Polymer Science, 2009
- Proton Conductivity Enhancement by Nanostructural Control of Poly(benzimidazole)‐Phosphoric Acid AdductsAdvanced Materials, 2008
- The Operation Characteristics of MEAs with Pinholes for Polymer Electrolyte Membrane Fuel CellsElectrochemical and Solid-State Letters, 2008
- Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranesEnergy, 2007
- Single PEMFC Design and Validation for High-Temperature MEA Testing and Diagnosis up to 300°CElectrochemical and Solid-State Letters, 2007
- Pd-based PdPt(19:1)/C electrocatalyst as an electrode in PEM fuel cellElectrochemistry Communications, 2006
- Integration of high temperature PEM fuel cells with a methanol reformerJournal of Power Sources, 2005
- Dependence of PEM fuel cell performance on catalyst loadingJournal of Power Sources, 2004
- Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above 100 °CChemistry of Materials, 2003
- Electrical Impedance of a Pore Wall for the Flooded‐Agglomerate Model of Porous Gas‐Diffusion ElectrodesJournal of the Electrochemical Society, 1989