Pore design and engineering for filters and membranes
Authors:
- 2 December 2005
- journal article
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 364 (1838) , 161-174
Abstract
In filtration, the concept of pore size is not easy to define. In microfiltration, there are numerous advantages in employing a surface filtering membrane, rather than one relying on depth filtration mechanisms from a tortuous pore flow channel. Modern manufacturing techniques provide means to produce surface filtering membranes. For filtration, it is shown that a suitable pore design is an array of long thin slots. An analysis of fluid flow through the slots suggests that a short slot is adequate, but experimental data with suspended material indicates that slot length is important. Using long slots and careful control of the flow through the membrane it is possible to filter deforming particles such as oil drops from water.Keywords
This publication has 11 references indexed in Scilit:
- Modelling of dead-end microfiltration with pore blocking and cake formationJournal of Membrane Science, 2002
- Ceramic microsieves: influence of perforation shape and distribution on flow resistance and membrane strengthJournal of Membrane Science, 2002
- Particulate fouling of surface microfilters with slotted and circular pore geometryJournal of Membrane Science, 2002
- Filtration of lager beer with microsieves: flux, permeate haze and in-line microscope observationsJournal of Membrane Science, 2002
- Transport mechanism of deformable droplets in microfiltration of emulsionsChemical Engineering Science, 2001
- The rejection of oil by microfiltration of a stabilised kerosene/water emulsionJournal of Membrane Science, 2000
- Critical flux concept for microfiltration foulingJournal of Membrane Science, 1995
- Theory and experiment on the three-dimensional motion of a freely suspended spherical particle at the entrance to a pore at low Reynolds numberChemical Engineering Science, 1983
- An infinite-series solution for the creeping motion through an orifice of finite lengthJournal of Fluid Mechanics, 1982
- Self-diffusion of particles in shear flow of a suspensionJournal of Fluid Mechanics, 1977