DESIGN AND EXPERIMENT OF CENTRIFUGAL COLLISION TEST DEVICE FOR MILLET AND SWEET BUCKWHEAT GRAIN
Authors:
- 30 December 2021
- journal article
- research article
- Published by INMA Bucharest-Romania in INMATEH Agricultural Engineering
- p. 193-202
Abstract
This critical collision damage force of millet and sweet buckwheat grain and the shelling force of shelled granular materials are important basic data for research of threshing and shelling technology and equipment. In order to master the linear velocity and collision force of grain with different moisture content when collision damage occurs, a centrifugal collision test device is designed. Based on the dynamic and kinematic analysis of grain in the centrifugal rotary table, the collision force between grain and steel plate was measured by PVDF piezoelectric pressure sensor and data acquisition system. The results showed that: under the same moisture content, the higher the rotational speed, the higher the grain crushing rate; at the same rotational speed, with the increase of moisture content, the crushing rate first decreased and then increased. When the moisture content of Jingu-21 and Yuqiao-4 is 19.7% and 17.8%, respectively, the grain crushing rate was the lowest. In terms of the anti-collision ability of grain, the optimum moisture content of threshing is between 19.7% and 21% for millet. For sweet buckwheat, the optimum moisture content of threshing is 17.8% ~19%, while the optimum moisture content of shelling by centrifugal sheller is about 11%. The faster the rotational speed of centrifugal rotary table is, the greater the linear speed of grain is, and the greater the collision force is. When the linear velocity of grain was 8.32 m/s and 11.30 m/s respectively, the millet grain moisture content was 11.1% and 20.9% respectively, damage began to appear, and the corresponding collision force was about 5.51 N and 10.6 N, respectively. When the linear velocity of grain was 8.32 m/s and 11.30m/s respectively, and the moisture content was 11.1% and 22.8% of the sweet buckwheat grain respectively, damage began to appear, the corresponding collision force was about 8.92 N and 12.79 N, respectively. When the rotating speed of rotary table was 910 r/min, the linear speed of grain was 27.05 m/s, the crushing rate of millet and sweet buckwheat grain in harvest period were 56.30% and 63.76%, respectively, and the crushing rate of millet and buckwheat grain with 11.1% moisture content were 86.27% and 89.4%, respectively. The research results can provide theoretical basis for design and optimization of millet and sweet buckwheat combine harvester, threshing device and shelling device.Keywords
This publication has 16 references indexed in Scilit:
- 新时期机械设计制造及自动化专业特色分析建筑技术研究, 2020
- DESIGN OF SIEVE-ROLL COMBINED PEANUT PODS CLEANING DEVICEINMATEH Agricultural Engineering, 2019
- Revisiting the versatile buckwheat: reinvigorating genetic gains through integrated breeding and genomics approachPlanta, 2019
- Research on divider losses with high-speed photography for foxtail millet harvestingFuture Generation Computer Systems, 2018
- Experimental determination of the coefficient of restitution of particle-particle collision for frozen maize grainsPowder Technology, 2018
- Multiple frictional impact dynamics of threshing process between flexible tooth and grain kernelComputers and Electronics in Agriculture, 2017
- Sensor for monitoring rice grain sieve losses in combine harvestersBiosystems Engineering, 2016
- Study on Performance Improvement of a Head-Feeding Rice Combine for Foxtail Millet HarvestingJournal of Biosystems Engineering, 2015
- Theoretical analysis and finite element simulation of a rice kernel obliquely impacted by a threshing toothBiosystems Engineering, 2013
- Variations in leaf anatomy ofLarix gmeliniireflect adaptation of its photosynthetic capacity to climate changesActa Ecologica Sinica, 2013