Controlling Ionic Transport through the PEO-LiTFSI/LLZTO Interface
Open Access
- 1 July 2019
- journal article
- research article
- Published by The Electrochemical Society in The Electrochemical Society Interface
- Vol. 28 (2) , 63-69
Abstract
A highly resistive Polyethylene oxide-LiTFSI(PEO-LiTFSI)/ Lithium Lanthanum Zirconium Oxide (LLZO) interface, with a resistivity of 95 kOhms.cm2 (30°C) is believed to limit the total conductivity of ceramic-polymer composite electrolyte (CPE). To achieve higher ionic conductivity, the interfacial impedance (Rinterface) must be reduced to <~100 Ohms.cm2 to enable cell impedances comparable to Li-ion technology. The goal of this study was to investigate the origin of this high Rinterface. It was hypothesized that LLZO surface impurities and abrupt changes in Li-ion concentration between the PEO-LiTFSI/LLZO electrolytes contribute to the high impedance. By removing surface impurities through heat-treatment, the Rinterface was reduced to 180 Ohms.cm2 at 30°C. Optimization of Li-salt concentration in PEO to 15:1, resulted in reduction of Rinterface from 1.6 kOhms.cm2 to 421 Ohms.cm2. By understanding the underpinning mechanisms that govern the ceramic-polymer interface impedance, we believe it is possible to develop high conductivity CPE that are easy to fabricate and integrate into solid-state batteries.Keywords
This publication has 36 references indexed in Scilit:
- Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium batteryJournal of Solid State Electrochemistry, 2018
- PEO/garnet composite electrolytes for solid-state lithium batteries: From “ceramic-in-polymer” to “polymer-in-ceramic”Nano Energy, 2018
- Solid polymer electrolytes incorporating cubic Li7La3Zr2O12 for all-solid-state lithium rechargeable batteriesElectrochimica Acta, 2017
- Electrochemical performance of a solvent-free hybrid ceramic-polymer electrolyte based on Li 7 La 3 Zr 2 O 12 in P(EO) 15 LiTFSIJournal of Power Sources, 2017
- Enhancement of ionic conductivity of composite membranes for all-solid-state lithium rechargeable batteries incorporating tetragonal Li7La3Zr2O12 into a polyethylene oxide matrixJournal of Power Sources, 2015
- Analysis of composite electrolytes with sintered reinforcement structure for energy storage applicationsJournal of Power Sources, 2013
- The role of Al and Li concentration on the formation of cubic garnet solid electrolyte of nominal composition Li7La3Zr2O12Solid State Ionics, 2012
- Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12Angewandte Chemie International Edition, 2007
- Interfacial phenomena in polymer-electrolyte cells: lithium passivation and cycleabilityJournal of Power Sources, 1993
- Electroceramics: Characterization by Impedance SpectroscopyAdvanced Materials, 1990