Maximizing USRP N210 SDR transfer rate by offloading modulation to the on-board FPGA
- 1 October 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 110-115
Abstract
One of the challenges of the design of Software Defined Radios (SDR) is to maintain a high level of reconfigurability without sacrificing data rates. In this paper, we consider the USRP N210, which is an SDR kit made by Ettus Research. It consists of an FPGA connected to an RF front-end. The USRP is operated by a host computer where most of the processing is done while the FPGA is used mainly to control the RF front-end, manage communication with the host, and convert sample rates. The maximal rate supported by the USRP hardware can not be practically achieved due to the bottleneck in the data transfer between the host and USRP and the limited computational ability of the computer. To deal with this problem, we implement a modulator and demodulator in the FPGA of the USRP. The proposed system is capable of processing data at the maximum sample rate supported by the hardware. This is accomplished by transferring only raw data between host and USRP, reducing transfer rate by up to 64 times; thus, bypassing the host transfer bottleneck. Additionally, offloading some of the processing to the FPGA makes communication at the maximum rate achievable with an off the shelf computer. An evaluation of the performance of the suggested system from the communication perspective is performed. We also showcase the system's ability to work at the maximum sample rate supported by the USRP.Keywords
This publication has 10 references indexed in Scilit:
- A high-performance and high-programmability reconfigurable wireless development platform2014
- An FPGA-based all-digital 802.11b & 802.15.4 receiver for the Software Defined Radio paradigm2014
- CRUSH: Cognitive Radio Universal Software Hardware2012
- Design and implementation of BPSK transmitter and receiver for Software Defined Radio on a Model Based Development Platform2011
- Software Defined Radio: Challenges and OpportunitiesIEEE Communications Surveys & Tutorials, 2010
- Implementation of a BPSK Transceiver on Hybrid Software Defined Radio Platforms2008
- Synchronization in software radios. Carrier and timing recovery using FPGAs2002
- Multirate digital filters for symbol timing synchronization in software defined radiosIEEE Journal on Selected Areas in Communications, 2001
- Interpolation in digital modems. I. FundamentalsIEEE Transactions on Communications, 1993
- A BPSK/QPSK Timing-Error Detector for Sampled ReceiversIEEE Transactions on Communications, 1986