Tensile Performance Sensitivity to Variations of Standard 17-4 PH Heat Treatments on LPBF-Produced Material
Open Access
Abstract
Standard heat treatments for metals of a particular composition are typically designed with the assumption of a conventional starting microstructure, such as that produced by casting or wrought processing. When applied to metals fabricated by Laser Powder Bed Fusion (LPBF) metal additive manufacturing (AM), these heat treatments can produce inconsistent performance due to the unique as-built microstructures. This study investigates how modifications to standard heat treatments for 17-4 PH steel influence the microstructure and mechanical properties of LPBF-fabricated material. Specimens were produced and subjected to varying solutionizing and homogenizing treatments followed by standard aging treatments. Microstructures were characterized using optical microscopy, Electron Backscatter Diffraction (EBSD), and X-ray diffraction (XRD), and mechanical properties were evaluated through uniaxial tensile testing. Based on these results, recommendations are provided for achieving improved wrought-like performance in LPBF 17-4 PH steel.Keywords
Funding Information
- Honeywell Federal Manufacturing and Technologies (DE-NA0002839)
- U.S. Department of Energy
This publication has 34 references indexed in Scilit:
- Laser powder bed fusion of 17–4 PH stainless steel: A comparative study on the effect of heat treatment on the microstructure evolution and mechanical propertiesAdditive Manufacturing, 2021
- Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4VAdditive Manufacturing, 2021
- Origin of dislocation structures in an additively manufactured austenitic stainless steel 316LActa Materialia, 2020
- Nitrogen Effects in Additively Manufactured Martensitic Stainless Steels: Conventional Thermal Processing and Comparison with WroughtMetallurgical and Materials Transactions A, 2020
- Effect of powder chemical composition on the as-built microstructure of 17-4 PH stainless steel processed by selective laser meltingAdditive Manufacturing, 2019
- Evidence of austenite by-passing in a stainless steel obtained from laser melting additive manufacturingAdditive Manufacturing, 2019
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible MicrostructureJOM, 2015
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser MeltingJournal of Materials Engineering and Performance, 2014
- Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titaniumActa Materialia, 2012
- Metastable Austenite in 17–4 Precipitation‐Hardening Stainless Steel Produced by Selective Laser MeltingAdvanced Engineering Materials, 2010