Synthesis and characterization of organically modified attapulgite/polyurethane nanocomposites
- 9 May 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2562-2570
Abstract
Polyurethane (PU) nanocomposites filled with attapulgite (ATT) nanorods were synthesized and characterized with thermal analysis, dynamic mechanical analysis (DMA), and mechanical testing. The formulations were based on 4,4′‐methylene bis(phenyl isocyanate) (MDI), polytetrahydrofuran, 1,4‐butanediol, and inorganic ATT premodified with MDI. The original and premodified ATT (ATT–OH and ATT–MDI) nanorods were characterized with thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy. The analysis revealed that 17 wt % MDI was grafted/adsorbed onto the surface of ATT as a result of the modification. Pristine PU and ATT–MDI/PU nanocomposites were characterized with scanning electron microscopy, differential scanning calorimetry, and TGA. The mechanical tests and DMA showed an increase in the storage modulus and Young's modulus with increasing ATT–MDI content. The crystallinity of the hard and soft segments and thermal stability showed enhancements over those of the neat resin. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 31 references indexed in Scilit:
- Crystallization and thermal properties of polyamide 6 composites filled with different nanofillersMaterials Letters, 2007
- Preparation and characterization of polyurethane–carbon nanotube compositesSoft Matter, 2005
- Preparation and rheology of polyamide-6/attapulgite nanocomposites and studies on their percolated structurePolymer, 2005
- Thermoplastic polyurethane nanocomposites of reactive silicate clays: effects of soft segments on propertiesPolymer, 2005
- The effect of hard segment ordering in copolyurethane elastomers obtained by using simultaneously two types of diisocyanatesPolymer, 2003
- Effect of Polymer-Filler and Filler-Filler Interactions on Dynamic Properties of Filled VulcanizatesRubber Chemistry and Technology, 1998
- Reinforcement of polyurethane elastomers with microfibres having varying aspect ratiosJournal of the Chemical Society, Faraday Transactions, 1995
- Fine structure of nylon–6–clay hybridJournal of Polymer Science Part B: Polymer Physics, 1994
- Multiphase structure of a segmented polyurethane: effects of temperature and annealingMacromolecules, 1992
- Properties of segmented polyurethane zwitterionomer elastomersJournal of Macromolecular Science, Part B, 1984