Mechanistic Insights into m-Cresol Adsorption on Functional Resins: Surface Chemistry and Adsorption Behavior
Open Access
Abstract
The removal of high-concentration m-cresol from industrial wastewater remains a significant challenge due to its toxicity and persistence. In this study, a commercially available functionalized resin with a high BET surface area (1439 m2 g−1) and hierarchical pore structure was employed for the adsorption of pure m-cresol at an initial concentration of 20 g L−1, representative of coal-based industrial effluents. Comprehensive characterization confirmed the presence of oxygen-rich functional groups, amorphous polymeric structure, and uniform surface morphology conducive to adsorption. Batch experiments were conducted to evaluate the effects of resin dosage, contact time, temperature, and equilibrium concentration. Under optimized conditions (0.15 g resin, 60 °C), a maximum adsorption capacity of 556.3 mg g−1 and removal efficiency of 71% were achieved. Kinetic analysis revealed that the pseudo-second-order model best described the adsorption process (R2 > 0.99). Isotherm data fit the Langmuir model most closely (R2 = 0.9953), yielding a monolayer capacity of 833.3 mg g−1. Thermodynamic analysis showed that adsorption was spontaneous (ΔG° < 0), endothermic (ΔH° = 7.553 kJ mol−1), and accompanied by increased entropy (ΔS° = 29.90 J mol−1 K−1). The good agreement with the PSO model is indicative of chemisorption, as supported by other lines of evidence, including thermodynamic parameters (e.g., positive ΔH° and ΔS°), surface functional group characteristics, and molecular interactions. The adsorption mechanism was elucidated through comprehensive modeling of adsorption kinetics, isotherms, and thermodynamics, combined with detailed physicochemical characterization of the resin prior to adsorption, reinforcing the mechanistic understanding of m-cresol–resin interactions.Keywords
Funding Information
- Energy Revolution S&T Program of Yulin Innovation Institute of Clean Energy (E411020705, 2022TZRC01, 2023G K03, QCYRCXM-2023-055)
- High-Level Talent Project Introduction Plan of Shaanxi Province (E411020705, 2022TZRC01, 2023G K03, QCYRCXM-2023-055)
- Doctoral Scientific Research Foundation of Yulin University (E411020705, 2022TZRC01, 2023G K03, QCYRCXM-2023-055)
- in Chuangyuan high-level innovative and entrepreneurial talents project (E411020705, 2022TZRC01, 2023G K03, QCYRCXM-2023-055)
This publication has 48 references indexed in Scilit:
- Analysis of cardiac developmental toxicity induced by m-cresol in early life of zebrafish and its mechanismComparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, 2025
- Periodate activation with polyaniline-derived carbon for bisphenol A degradation: Insight into the roles of nitrogen dopants and non-radical species formationChemical Engineering Journal, 2024
- Film-like bacterial cellulose based molecularly imprinted materials for highly efficient recognition and adsorption of cresol isomersChemical Engineering Journal, 2020
- Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—BET, BJH, and DFTThe Canadian Journal of Chemical Engineering, 2019
- On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kineticsChemical Engineering Journal, 2016
- Microbial degradation of phenol and phenolic derivativesEngineering in Life Sciences, 2012
- Urea-formaldehyde resins characterized by thermal analysis and FTIR methodJournal of Thermal Analysis and Calorimetry, 2008
- Van't Hoff analysis of K°(T): How good…or bad?Biophysical Chemistry, 2006
- Adsorption of Water-Soluble Dye onto Functionalized ResinJournal of Colloid and Interface Science, 2001
- Microstructural changes of phenolic resin during pyrolysisJournal of Applied Polymer Science, 2001