An experimental investigation of flame retardancy and thermal stability of treated and untreated kenaf fiber reinforced epoxy composites
- 1 November 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 43 (10) , 865-874
Abstract
Natural fiber reinforced polymeric composites perform poor in mechanical and thermal properties at elevated temperatures due to the cellulose and hemicellulose contents of natural fiber start degrading at elevated temperature. In this research work, flame retardancy and thermal stability of treated and untreated kenaf fiber reinforced epoxy composites have been experimentally investigated and reported. Two composite laminates, one with 6 % NaOH Alkali treated and another with untreated woven kenaf mats, were fabricated by hand lay-up technique followed by compression molding with 40 % fiber weight fractions. Flame retardancy test and various thermal characteristics studies such as thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), heat deflection temperature (HDT), and morphological analysis via scanning electron microscopy (SEM) tests were carried out. The results showed that alkali treated kenaf fiber composite achieved V 0 fire retardancy grade. The major weight losses, 86 % and 75.5 % for untreated and treated composites respectively were recorded between 300 °C and 450 °C. 13.6 % increase in HDT was noted for treated composite with 0.25 mm deflection at 0.45 MPa pressure condition. Thus the composite laminate with 6 % NaOH alkali-treated kenaf fiber achieved the best thermal stability with less degradation which is more suitable for automobile and aerospace applications.Keywords
This publication has 39 references indexed in Scilit:
- A Review on the Flammability and Flame Retardant Properties of Natural Fibers and Polymer Matrix Based CompositesComposites Research, 2015
- Processing and characterization of natural cellulose fibers/thermoset polymer compositesCarbohydrate Polymers, 2014
- Effect of various water immersions on mechanical properties of roselle fiber–vinyl ester compositesPolymer Composites, 2014
- A multiscale study on the structural and mechanical properties of the luffa sponge from Luffa cylindrica plantJournal of Biomechanics, 2014
- In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibresMaterials & Design (1980-2015), 2013
- Development and characterization of a laminate composite material from polylactic acid (PLA) and woven bamboo fabricComposites Part B: Engineering, 2012
- Mechanical properties of randomly oriented short Sansevieria cylindrica fibre/polyester compositesMaterials & Design (1980-2015), 2011
- Static bending and impact behaviour of areca fibers compositesMaterials & Design (1980-2015), 2011
- Comparative Studies of Mechanical and Interfacial Properties Between Jute and E-glass Fiber-reinforced Polypropylene CompositesJournal of Reinforced Plastics and Composites, 2009
- Pre-treatment of Flax Fibers for use in Rotationally Molded BiocompositesJournal of Reinforced Plastics and Composites, 2007