FILTER INLET VELOCITY REDISTRIBUTION WITH FILTER LOADING
Authors:
- 1 July 1996
- journal article
- research article
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 14 (3) , 279-291
Abstract
Previous flow visualizations and laser Doppler anemometer velocity measurements have shown that clean engine air filters are presented with very non-uniform velocity distributions when tested in the SAE universal panel Filter test housing. Experiments were conducted to measure the changes that occur in the velocity distribution in the plane 12.7 mm upstream of the filter as it is loaded with dust. Laser Doppler anemometer measurements of velocity profiles were performed for a production engine air Filter in the SAE universal panel filter test housing. Test conditions corresponded to a clean Filter, and dust-loaded Filters at additional pressure drops corresponding to 50 percent, 100 percent, and 150 percent of the design terminating pressure value. The results show that dust loading does make the velocity profiles less non-uniform, but that the changes are not dramatic. The inlet velocity profiles for the design capacity Filter remain very non-uniform.Keywords
This publication has 4 references indexed in Scilit:
- LOCAL EFFICIENCY MEASUREMENTS APPLICABLE TO BOTH AUTOMOTIVE ENGINE AND CABIN FILTRATIONParticulate Science and Technology, 1994
- Theoretical Study of Aerosol Filtration by Fibrous FiltersAerosol Science and Technology, 1982
- Boundary and inertia effects on flow and heat transfer in porous mediaInternational Journal of Heat and Mass Transfer, 1981
- Sampling of liquid aerosols by wires, cylinders, and slides, and the efficiency of impaction of the dropletsJournal of Colloid Science, 1949