An In Situ Test Method for Evaluating the Coupled Pore Pressure Generation and Nonlinear Shear Modulus Behavior of Liquefiable Soils
Authors:
- 1 January 2009
- journal article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 32 (1) , 11-21
Abstract
An in situ test method for evaluating the coupled response between excess pore water pressure generation and nonlinear shear modulus behavior has been developed. This technique is an active, strain-based method that may be used to directly evaluate the liquefaction resistance of soils in place. The test is based on the premise of dynamically loading a native soil deposit in a manner similar to an earthquake while simultaneously measuring its response with push-in sensors. Dynamic loading is performed via a large, buggy-mounted hydraulic shaker (vibroseis) that is used to generate vertically propagating (downward), horizontally polarized shear waves (Svh-waves) of varying amplitude within an instrumented portion of a liquefiable soil deposit. The newly-developed, push-in sensors consist of a three-component (3D) MEMS accelerometer and a miniature pore water pressure transducer. The new test method has been used to conduct field experiments in liquefiable soil deposits approximately 3 to 4 m below the ground surface. These tests were successful at measuring: (1) excess pore water pressure generation, and (2) nonlinear shear modulus behavior in native silty-sand deposits as a function of induced cyclic shear strain and number of loading cycles. These accomplishments represent a large step forward in the ability to accurately evaluate the susceptibility of a soil deposit to earthquake-induced liquefaction. While typical test results are presented herein, this paper primarily focuses on the equipment, field testing practices, and data analysis procedures for the new test method.Keywords
This publication has 14 references indexed in Scilit:
- In Situ Pore-Pressure Generation Behavior of Liquefiable SandJournal of Geotechnical and Geoenvironmental Engineering, 2007
- Development of an In Situ Dynamic Liquefaction TestGeotechnical Testing Journal, 2005
- Direct evaluation of effectiveness of prefabricated vertical drains in liquefiable sandSoil Dynamics and Earthquake Engineering, 2004
- Liquefaction Resistance of Soils: Summary Report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2001
- Lotung Downhole Array. II: Evaluation of Soil Nonlinear PropertiesJournal of Geotechnical Engineering, 1995
- Piezometer Performance at Wildlife Liquefaction Site, CaliforniaJournal of Geotechnical Engineering, 1994
- Blast-Induced Liquefaction of an Alluvial Sand DepositGeotechnical Testing Journal, 1992
- In-Situ Pore Water Pressures and Ground Motions During the 1987 Chiba-Toho-Oki EarthquakeSoils and Foundations, 1989
- Dynamics of Liquefaction During the 1987 Superstition Hills, California, EarthquakeScience, 1989
- Pore Water Pressures Measured in Sand Deposits During an EarthquakeSoils and Foundations, 1981