Study on the effect of hydrodynamic pressure on the tribological performance of textured bioimplants
- 20 July 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (6) , 3135-3145
Abstract
Surface texturing is an effective technology in improving the tribological performance of artificial joints. However, the mechanism behind it is still a controversial topic, especially when talking about the functionality of hydrodynamic pressure. In this paper, Finite Difference Method was used to solve the steady-state Reynolds equation. It was found that, under the given conditions, hydrodynamic pressure only played a minor role in the tribological performance of textured bioimplants. A further theoretical study indicated that this phenomenon was attributed to the working environments of artificial joints: low viscosity lubricant and low sliding speed. A comparison study between tribo-systems with various working conditions also showed that hydrodynamic pressure played a more important role in the systems either under fast speed or lubricated by high-viscosity solution. Finally, a pin-on-disk frictional study was carried out with different sliding velocities and it was confirmed that hydrodynamic pressure has little effect on the tribological performance of textured bioimplants.Keywords
Funding Information
- Science Foundation Ireland (15/RP/B3208)
- State Administration of Foreign Experts Affairs and the Ministry of Education of China (B07014)
This publication has 35 references indexed in Scilit:
- The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contactApplied Surface Science, 2013
- Determinants of Direct Medical Costs in Primary and Revision Total Knee ArthroplastyClinical Orthopaedics and Related Research, 2013
- Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regimeProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Study on long life of artificial joints by investigating optimal sliding surface geometry for improvement in wear resistancePrecision Engineering, 2009
- On the Prediction of Cavitation in Dimples Using a Mass-Conservative AlgorithmJournal of Tribology, 2009
- Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting SurfacesTribology Letters, 2009
- Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in waterTribology International, 2003
- Rheology of joint fluid in total knee arthroplasty patientsJournal of Orthopaedic Research, 2002
- Automobile engine tribology—design considerations for efficiency and durabilityWear, 1998
- A Theory of Lubrication by MicroirregularitiesJournal of Basic Engineering, 1966