The Effect of Isothermal Multi-Directional Forging on the Grain Structure, Superplasticity, and Mechanical Properties of the Conventional Al–Mg-Based Alloy
Open Access
Abstract
The current study observed a grain structure evolution in the central part and periphery of the sample of an Al–Mg–Mn-based alloy during isothermal multidirectional forging (IMF) at 350 °C with a cumulative strain of 2.1–6.3 and a strain per pass of 0.7. A bimodal grain size distribution with areas of fine and coarse grains was observed after IMF and subsequent annealing. The grain structure, mechanical properties, and superplastic behavior of the samples subjected to IMF with a cumulative strain of 6.3 and the samples exposed to IMF with subsequent cold rolling were compared to the samples exposed to a simple thermo-mechanical treatment. The micro-shear bands were formed inside original grains after the first three passes. The fraction of recrystallized grains increased and the mean size decreased with an increasing cumulative strain from 2.1 to 6.3. Significant improvements of mechanical properties and superplasticity were observed due to the formation of a homogenous fine grain structure 4.8 µm in size after treatment including IMF and subsequent cold rolling.Keywords
Funding Information
- Russian Foundation for Fundamental Investigations (18-03-01115)
This publication has 43 references indexed in Scilit:
- Extreme grain refinement by severe plastic deformation: A wealth of challenging scienceActa Materialia, 2013
- Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in developmentMaterials Science and Engineering: A, 2013
- Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformationMaterials Science and Engineering: A, 2009
- Using high-pressure torsion for metal processing: Fundamentals and applicationsProgress in Materials Science, 2008
- Superplasticity of Fine-Grained Magnesium Alloy AZ31 Processed by Multi-Directional ForgingMATERIALS TRANSACTIONS, 2007
- Low Temperature Superplasticity of Fine-Grained Magnesium Alloy AZ31Advanced Materials Research, 2006
- Effect of Pass Strain on Grain Refinement in 7475 Al Alloy during Hot Multidirectional ForgingMATERIALS TRANSACTIONS, 2004
- Plastic Deformation: Role of Recovery and Recrystallization2001
- OBSERVATIONS OF HIGH STRAIN RATE SUPERPLASTICITY IN COMMERCIAL ALUMINUM ALLOYS WITH ULTRAFINE GRAIN SIZESScripta Materialia, 1997
- Large strain multidirectional deformation of 1100 aluminum at 300 KJournal of the Mechanics and Physics of Solids, 1982