Drilling Fluid Density and Hydraulic Drag Reduction With Glass Bubble Additives
- 11 May 2017
- journal article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 139 (4) , 042904
Abstract
This study concentrates on the use of materials known as hollow glass spheres, also known as glass bubbles, to reduce the drilling fluid density below the base fluid density without introducing a compressible phase to the wellbore. Four types of lightweight glass spheres with different physical properties were tested for their impact on rheological behavior, density reduction effect, survival ratio at elevated pressures, and hydraulic drag reduction effect when mixed with water-based fluids. A Fann75 high pressure high temperature (HPHT) viscometer and a flow loop were used for the experiments. Results show that glass spheres successfully reduce the density of the base drilling fluid while maintaining an average of 0.93 survival ratio, the rheological behavior of the tested fluids at elevated concentrations of glass bubbles is similar to the rheological behavior of conventional drilling fluids and hydraulic drag reduction is present up to certain concentrations. All results were integrated into hydraulics calculations for a wellbore scenario that accounts for the effect of temperature and pressure on rheological properties, as well as the effect of glass bubble concentration on mud temperature distribution along the wellbore. The effect of drag reduction was also considered in the calculations.Keywords
This publication has 17 references indexed in Scilit:
- Turbulent drag reduction using fluid spheresJournal of Fluid Mechanics, 2013
- Experimental Evaluation of Separation Methods for a Riser Dilution Approach to Dual Density DrillingJournal of Energy Resources Technology, 2011
- Drag reduction by polymer additives in a turbulent pipe flow: numerical and laboratory experimentsJournal of Fluid Mechanics, 1997
- Measurements of local skin friction in a microbubble-modified turbulent boundary layerJournal of Fluid Mechanics, 1985
- Laser-Doppler anemometer measurements of turbulent structure in drag-reducing fibre suspensionsJournal of Fluid Mechanics, 1985
- Observations on turbulent-drag reduction in a dilute suspension of clay in sea-waterJournal of Fluid Mechanics, 1976
- Drag reduction fundamentalsAIChE Journal, 1975
- A Freeman Scholar Lecture: The Effect of Additives on Fluid FrictionJournal of Basic Engineering, 1972
- Turbulent flow of non‐newtonian systemsAIChE Journal, 1959
- TURBULENT FLOW IN PIPES, WITH PARTICULAR REFERENCE TO THE TRANSITION REGION BETWEEN THE SMOOTH AND ROUGH PIPE LAWS.Journal of the Institution of Civil Engineers, 1939