Production of NiTi via the FFC Cambridge Process
- 1 January 2008
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (12) , E171-E177
Abstract
The FFC Cambridge process is a direct electrodeoxidation process used to reduce metal oxides to their constituent metals in a molten CaCl2CaCl2 salt bath. NiTiO3NiTiO3 was used as a precursor (the first stable oxide to form upon blending and sintering NiO and TiO2TiO2 powders) and was successfully reduced using the FFC Cambridge process at 1173K1173K and a constant cell voltage of −3.1V−3.1V to produce a NiTi alloy. This work builds on the literature work [ Chinese Science Bulletin , 51 , 2535 (2006) ] through: (i) a predominance diagram calculated to show the regions of phase stability throughout the usable potential window of the CaCl2CaCl2 salt; (ii) the investigation of a wide range of reduction times for a fixed cell voltage, elucidating several additional stable phases, to yield a complete and detailed reduction pathway. The reduction pathway for NiTiO3NiTiO3 was identified through the analysis of a series of partial reductions, with fully reduced NiTi formed after a period of 24h24h . The first stage of the reaction involved the rapid formation of Ni and CaTiO3CaTiO3 . The reduction then proceeded via the formation of the intermediate compounds Ni3TiNi3Ti and Ni2Ti4ONi2Ti4O . All the NiTiO3NiTiO3 and Ni were consumed after a period of 6h6h , while the intermediate compounds remained until the reaction was near completion. The experimental results related well to the thermodynamic predictions of the predominance diagram. A small variation in stoichiometry of the produced NiTi observed from the edge to the core of the samples was attributed to redeposition of Ti on the sample surface from the salt and a slightly Ti-rich NiTiO3NiTiO3 precursor material.Keywords
This publication has 16 references indexed in Scilit:
- The Production of Ti–Mo Alloys from Mixed Oxide Precursors via the FFC Cambridge ProcessJournal of the Electrochemical Society, 2008
- Direct electrochemical production of Ti–10W alloys from mixed oxide preform precursorsJournal of Alloys and Compounds, 2006
- Electrochemistry at Conductor/Insulator/Electrolyte Three-Phase Interlines: A Thin Layer ModelThe Journal of Physical Chemistry B, 2005
- Predominance Diagrams for Electrochemical Reduction of Titanium Oxides in Molten CaCl[sub 2]Journal of the Electrochemical Society, 2005
- Voltammetry of Titanium Dioxide in Molten Calcium Chloride at 900°CJournal of the Electrochemical Society, 2005
- Direct electrolytic preparation of chromium powderMetallurgical and Materials Transactions B, 2004
- Reduction of titanium and other metal oxides using electrodeoxidationMaterials Science and Technology, 2004
- Calciothermic reduction of titanium oxide and in-situ electrolysis in molten CaCl2Metallurgical and Materials Transactions B, 2003
- Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chlorideNature, 2000
- Diagrammatic Representation of the Thermodynamics of Metal-Fused Chloride SystemsJournal of the Electrochemical Society, 1962