Boost DC-DC Converter With Fast Reference Tracking (FRT) and Charge-Recycling (CR) Techniques for High-Efficiency and Low-Cost LED Driver
Authors:
- 28 August 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 44 (9) , 2568-2580
Abstract
An RGB LED driver with the fast reference tracking (FRT) and charge-recycling (CR) techniques is proposed to implement a high-efficiency and low-cost RGB backlight module in color sequential notebook computers' display. The proposed LED driver composed of an asynchronous 1.5 MHz DC/DC boost converter with the FRT and CR techniques was fabricated in TSMC 0.25 mum BCD 40 V technology to generate 16 V for 6-series red (R) LEDs or 21 V for 6-series green (G), or blue (B) LEDs. The FRT technique can speed up the reference tracking performance and effectively improve the up-tracking performance. However, the down-reference tracking depends on the load current and output capacitor. It is difficult to enhance the transient response without reducing the efficiency. Therefore, the CR technique is proposed to store extra energy on the recycling capacitor when the output voltage is switched from high- to low-supplying voltage level and releases the reserved energy back to the output node at next period. Furthermore, the output voltage can be rapidly switched between two different voltage levels by FRT technique without consuming much power owing to the restored energy by the CR technique. Experimental results show that the total power consumption of a notebook computer's 15.4' LCD panel can be reduced from 5 W in cold-cathode fluorescent lamp (CCFL) backlight module to about 2-3 W in RGB LED backlight module with the field color sequential (FCS) algorithm. Furthermore, after the implementation of the LED driver with the FRT and CR techniques, the power loss can be reduced to about 24% of that without the FRT and CR techniques.Keywords
This publication has 20 references indexed in Scilit:
- Boost DC-DC converter with charge-recycling (CR) and fast reference tracking (FRT) techniques for high-efficiency and low-cost LED driver2008
- LED drivers with PPD compensation for achieving fast transient response2008
- LED Backlight Driving System for Large-Scale LCD PanelsIEEE Transactions on Industrial Electronics, 2007
- A 3MHz Low-Voltage Buck Converter with Improved Light Load Efficiency2007
- Power driver topologies and control schemes for LEDsAPEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, 2007
- Analysis and Design of Voltage Controlled Current Source for LDO Frequency Compensation2006
- LED Back-Light Driving System for LCD Panels2006
- A voltage-mode PWM buck regulator with end-point predictionIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2006
- How color break-up occurs in the human-visual system: The mechanism of the color break-up phenomenonJournal of the Society for Information Display, 2006
- A Frequency Compensation Scheme for LDO Voltage RegulatorsIEEE Transactions on Circuits and Systems I: Regular Papers, 2004