Equilibrium Analysis of Cyclic Adsorption Processes: CO 2 Working Capacities with NaY
Authors:
- 1 October 2005
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 40 (13) , 2569-2591
Abstract
The most common application of adsorption is via pressure swing adsorption. In this type of design, the feed and regeneration temperatures are kept approximately equal, whereas the feed pressure is higher than the regeneration pressure. By exploiting the difference in the amount adsorbed at a higher pressure to the amount adsorbed at a lower pressure, a working capacity is realized. Therefore, by examining the expected (ideal) working capacity of an adsorbent, a performance characteristic can be analyzed for a pressure swing adsorption process (PSA). For this work, feed pressures up to 2.0 atm CO2 and feed temperatures from 20°C to 200°C were investigated. These limits were chosen due to the nature of the target process: CO2 removal from flue gas. Carbon dioxide adsorption isotherms were determined in a constant volume system at 23°C, 45°C, 65°C, 104°C, 146°C, and 198°C, for pressures between 0.001 and 2.5 atm CO2 with NaY zeolite. These data were fit with the temperature dependent form of the Toth isotherm. Henry's Law constants and the heat of adsorption at the limit of zero coverage were also determined using the concentration pulse method. Comparison of the Henry's Law constants derived from the Toth isotherm, and those obtained with the concentration pulse method provided excellent agreement. By using the Toth isotherm, expected working capacity contour plots were constructed for PSA (Pressure Swing Adsorption), TSA (Temperature Swing Adsorption), and PTSA (Pressure Temperature Swing Adsorption) cycles. The largest expected working capacities were obtained when the bed was operated under a high‐pressure gradient PSA cycle, or a high thermal and pressure gradient PTSA cycle. The results also showed that certain TSA and PSA cycle conditions would result with higher expected working capacities as the feed temperature increases.Keywords
This publication has 16 references indexed in Scilit:
- An experimental adsorbent screening study for CO2 removal from N2Microporous and Mesoporous Materials, 2004
- Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue Gas by Pressure Swing AdsorptionIndustrial & Engineering Chemistry Research, 1995
- Separation of a binary gas mixture by pressure swing adsorption: Comparison of different PSA cyclesAdsorption, 1995
- Effect of variable feed concentration on the performance of a pressure swing adsorption processAdsorption, 1995
- Pressure swing adsorption: An experimental study of diffusion‐induced separationAIChE Journal, 1988
- Pressure swing adsorption: Effects of incomplete purgeAIChE Journal, 1988
- Heat effects in pressure swing adsorption systemsChemical Engineering Science, 1988
- Retention volumes and retention times in binary chromatography. Determination of Equilibrium PropertiesJournal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases, 1985
- Determination of adsorption isotherms of the components of binary gas mixtures by gas chromatographyJournal of Chromatography A, 1973
- ADSORPTIVE AND GAS CHROMATOGRAPHIC PROPERTIES OF VARIOUS CATIONIC FORMS OF ZEOLITE XCanadian Journal of Chemistry, 1964