An analytical assessment of finite element and isogeometric analyses of the whole spectrum of Timoshenko beams
- 8 March 2016
- journal article
- research article
- Published by Wiley in ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
- Vol. 96 (10) , 1220-1244
Abstract
The theoretical results relevant to the vibration modes of Timoshenko beams are here used as benchmarks for assessing the correctness of the numerical values provided by several finite element models, based on either the traditional Lagrangian interpolation or on the recently developed isogeometric approach. Comparison of results is performed on both spectrum error (in terms of the detected natural frequencies) and on the l2 relative error (in terms of the computed eigenmodes): this double check allows detecting for each finite element model, and for a discretization based on the same number of degrees‐of‐freedom, N, the frequency threshold above which some prescribed accuracy level is lost, and results become more and more unreliable. Hence a quantitative way of measuring the finite element performance in modeling a Timoshenko beam is proposed. The use of Fast Fourier Transform is finally employed, for a selected set of vibration modes, to explain the reasons of the accuracy decay, mostly linked to a poor separation of the natural frequencies in the spectrum, which is responsible of some aliasing of modes.Keywords
Funding Information
- Ministero dell’Istruzione, dell’Università e della Ricerca (PRIN 2010-2011 / project 2010MBJK5B)
This publication has 70 references indexed in Scilit:
- A 2‐D continuum model of a mixture of bone tissue and bio‐resorbable material for simulating mass density redistribution under load slowly variable in timeZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2013
- Reflection and transmission of plane waves at surfaces carrying material properties and embedded in second-gradient materialsMathematics and Mechanics of Solids, 2013
- An optimal control procedure for bone adaptation under mechanical stimulusControl Engineering Practice, 2012
- Static and vibration analyses of thick, generally laminated deep curved beams with different boundary conditionsComposites Part B: Engineering, 2012
- Deformation analysis of functionally graded beams by the direct approachComposites Part B: Engineering, 2012
- Linear plane wave propagation and normal transmission and reflection at discontinuity surfaces in second gradient 3D continuaZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2011
- A superconvergent scheme for a locking‐free FEM in a Timoshenko optimal control problemZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2010
- Performance of a high‐continuity finite element in three‐dimensional elasticityInternational Journal for Numerical Methods in Biomedical Engineering, 2010
- AN ISO GEOMETRIC ANALYSIS APPROACH FOR THE STUDY OF STRUCTURAL VIBRATIONSJournal of Earthquake Engineering, 2006
- DYNAMICS OF TRANSVERSELY VIBRATING BEAMS USING FOUR ENGINEERING THEORIESJournal of Sound and Vibration, 1999