Millimeter-wave wideband transition from CPW to substrate integrated waveguide on electrically thick high-permittivity substrates
Authors:
- 1 October 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 138-141
Abstract
A wideband transition from coplanar waveguide (CPW) to substrate integrated waveguide (SIW) is proposed and presented in the 50 GHz frequency range. Electrically thick alumina was used in this case, representative for other high-permittivity substrates such as semiconductors. Simulations predict less than -15 dB return loss within a 35 % bandwidth. CPW probe measurements were carried out and 40 % bandwidth were achieved at -0.5 dB insertion loss for a single transition. Modified SIW via configurations being suitable for simplified fabrication on electrically thick substrates in the upper millimeter-wave spectrum are discussed in the second part.Keywords
This publication has 6 references indexed in Scilit:
- Circuital and Experimental Demonstration of a 3D Isotropic LH Metamaterial based on the rotated TLM schemeIEEE/MTT-S International Microwave Symposium, 2007
- Analysis and design of current probe transition from grounded coplanar to substrate integrated rectangular waveguidesIEEE Transactions on Microwave Theory and Techniques, 2005
- A stepped post-wall waveguide with aperture interface to standard waveguide2004
- Integrated microstrip and rectangular waveguide in planar formIEEE Microwave and Wireless Components Letters, 2001
- Integrated transition of coplanar to rectangular waveguides2001
- Substrate Optimization for Integrated Circuit AntennasIEEE Transactions on Microwave Theory and Techniques, 1983