Microstructure Formation and Carbon Partitioning with Austenite Decomposition during Isothermal Heating Process in Fe-Si-Mn-C Steel Monitored by In Situ Time-of-Flight Neutron Diffraction
Open Access
Abstract
Retained austenite is a key feature used to realize the transformation-induced plasticity in bainitic high strength steels. In this study, the authors focused on the formation of metastable austenite in Fe-0.61C-1.9Si-0.98Mn (mass%) during isothermal heating processes using in situ neutron diffraction techniques. Quantitative discussion of carbon partitioning processes is enabled by applying an in situ phase fraction analysis considering crystallographic textures, in addition to the carbon concentration estimation based on the lattice parameter of austenite. The carbon partitioning behavior is inhomogeneous, resulting in a bimodal carbon concentration distribution in austenite. The carbon enriched, high carbon austenite is stable during isothermal heating at 673 K and is retained even after cooling to room temperature. The remainder is low carbon austenite, which is gradually consumed by bainite transformation. Above 723 K, the high carbon austenite also decomposes to ferrite and cementite due to the fast diffusion of Si. Conversely, below 623 K, cementite is stabilized even without the diffusion of Si. These cementite formation mechanisms prevent the formation and retention of high carbon austenite. The inhomogeneous carbon distribution and cementite formation must be carefully considered to precisely predict the microstructure formation in Si-added bainitic steels.Keywords
This publication has 31 references indexed in Scilit:
- Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experimentsActa Materialia, 2013
- Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steelScripta Materialia, 2011
- Rietveld texture analysis from TOF neutron diffraction dataPowder Diffraction, 2010
- Effects of Si and Cr on Bainite Microstructure of Medium Carbon SteelsTetsu-to-Hagane, 2010
- Metallographic evidence of carbon diffusion in the growth of bainiteActa Materialia, 2009
- On the estimation of average crystallite size of zeolites from the Scherrer equation: A critical evaluation of its application to zeolites with one-dimensional pore systemsMicroporous and Mesoporous Materials, 2009
- Synchrotron X-ray studies of austenite and bainitic ferriteProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2008
- New Model for the Overall Transformation Kinetics of Bainite. Part 1: the ModelMATERIALS TRANSACTIONS, 2006
- Diffusion in growth of bainiteMetallurgical and Materials Transactions A, 1994
- Formation mechanism of bainitic ferrite in an Fe-2 Pct Si-0.6 Pct C alloyMetallurgical and Materials Transactions A, 1994