Tip Vortex Cavitation Inception Scaling for High Reynolds Number Applications
- 1 June 2009
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 131 (7) , 071301
Abstract
Tip vortices generated by marine lifting surfaces such as propeller blades, ship rudders, hydrofoil wings, and antiroll fins can lead to cavitation. Prediction of the onset of this cavitation depends on model tests at Reynolds numbers much lower than those for the corresponding full-scale flows. The effect of Reynolds number variations on the scaling of tip vortex cavitation inception is investigated using a theoretical flow similarity approach. The ratio of the circulations in the full-scale and model-scale trailing vortices is obtained by assuming that the spanwise distributions of the section lift coefficients are the same between the model-scale and the full-scale. The vortex pressure distributions and core sizes are derived using the Rankine vortex model and McCormick’s assumption about the dependence of the vortex core size on the boundary layer thickness at the tip region. Using a logarithmic law to describe the velocity profile in the boundary layer over a large range of Reynolds number, the boundary layer thickness becomes dependent on the Reynolds number to a varying power. In deriving the scaling of the cavitation inception index as the ratio of Reynolds numbers to an exponent , the values of are not constant and are dependent on the values of the model- and full-scale Reynolds numbers themselves. This contrasts traditional scaling for which is treated as a fixed value that is independent of Reynolds numbers. At very high Reynolds numbers, the present theory predicts the value of to approach zero, consistent with the trend of these flows to become inviscid. Comparison of the present theory with available experimental data shows promising results, especially with recent results from high Reynolds number tests. Numerical examples of the values of are given for different model- to full-scale sizes and Reynolds numbers.
Keywords
This publication has 11 references indexed in Scilit:
- Scaling of Tip Vortex Cavitation Inception Noise With a Bubble Dynamics Model Accounting for Nuclei Size DistributionJournal of Fluids Engineering, 2005
- CAVITATION IN VORTICAL FLOWSAnnual Review of Fluid Mechanics, 2002
- High Reynolds Number Boundary Layer Scaling on a Large Hydrofoil (HIFOIL)2001
- A Correlation of Leakage Vortex Cavitation in Axial-Flow PumpsJournal of Fluids Engineering, 1994
- Visualization of the Wing-Tip Vortex in Temporal and Spatial Pressure GradientsJournal of Fluids Engineering, 1991
- The Structure of a Three-Dimensional Tip Vortex at High Reynolds NumbersJournal of Fluids Engineering, 1991
- Laser anemometer measurements of trailing vortices in waterJournal of Fluid Mechanics, 1974
- On Cavitation Produced by a Vortex Trailing From a Lifting SurfaceJournal of Basic Engineering, 1962
- On the Resistance to the Rotation of a Disc Immersed in a FluidMathematical Proceedings of the Cambridge Philosophical Society, 1935
- Über laminare und turbulente ReibungZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1921