Design optimization, sensitivity analysis and operational comparison of a duplex helical elliptical tube metal hydride reactor
Authors:
- 10 September 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 4 (11) , 5851-5868
Abstract
Due to the strong exothermic/endothermic effect during the H2 absorption/desorption process, the design of metal hydride reactors has become a hot research topic to improve the rate of hydrogenation/dehydrogenation. Herein, based on bionic optimization and the constructal theory, a novel duplex helical elliptical tube reactor (DHER) is proposed for enhancing the heat transfer and reaction performances of metal hydride reactors. DHER displayed outstanding performances among 5 types of reactors, and the maximal temperature difference could be reduced by 5.1 K/5.6 K during the H2 absorption/desorption. The parameters of DHER were designed and optimized with the spiral diameter (Dc) = 10 mm, elliptical major axis (A) = 4 mm, elliptical minor axis (B) = 2 mm, pitch (Pt) = 13 mm, tilt angle (α) = 45°, and installation angle (β) = 180°. The sensitivity analysis for DHER is investigated, and the sequential effects of the structural parameters on the reaction performance followed the order of Dc > A > B > Pt > α. Through a comparative analysis of geometrical characteristics of the structural parameters and the reaction performance of the reactor, the results indicated that the radial projected area of the heat exchange tube is the dominant factor in the reaction performance of DHER. Moreover, the surface was calculated based on the sensitivity analysis data and fitted by the quadratic response surface regression model to predict the reaction time under different structural parameters, which may provide guidance for the design of reactors. In addition, the hydriding and dehydriding cyclic processes without preheating and precooling stages were confirmed to have prominent and reliable performances for DHER, attaining only 1227 s under its optimal cycle conditions during absorption (0.8 MPa, 273.15 K) and desorption (0.1 MPa, 373.15 K).Keywords
Funding Information
- State Key Laboratory of Chemical Engineering (SKL-ChE-18A02)
- National Natural Science Foundation of China (200014708, 21808183)
- Xi'an Science and Technology Bureau (2020KJRC0114)
- Education Department of Shaanxi Province (18JF031)
This publication has 34 references indexed in Scilit:
- Optimal design of metal hydride reactors based on CFD–Taguchi combined methodEnergy Conversion and Management, 2013
- Effect of pressure, composition and temperature characteristics on thermal response and overall reaction rates in a metal hydride tankInternational Journal of Hydrogen Energy, 2011
- Simulation study on the reaction process based single stage metal hydride thermal compressorInternational Journal of Hydrogen Energy, 2010
- Accurate simplified dynamic model of a metal hydride tankInternational Journal of Hydrogen Energy, 2008
- Simulation of heat transfer in a metal hydride reactor with aluminium foamInternational Journal of Hydrogen Energy, 2007
- Experimental and numerical study of discharge process of metal–hydrogen tankInternational Journal of Hydrogen Energy, 2007
- Bionic Optimization of Heat Transport Paths for Heat Conduction ProblemsJournal of Enhanced Heat Transfer, 2004
- Compressor-driven metal-hydride heat pumpsApplied Thermal Engineering, 1997
- Constructal-theory network of conducting paths for cooling a heat generating volumeInternational Journal of Heat and Mass Transfer, 1997
- Study of two-dimensional heat and mass transfer during absorption in a metal-hydrogen reactorInternational Journal of Hydrogen Energy, 1995