Processing parameters for consolidating PEEK/carbon fiber (APC‐2) composites
Authors:
- 1 December 1992
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 13 (6) , 421-426
Abstract
This consolidation of unidirectional APC‐2 was studied experimentally to determine the effects of processing parameters (pressure, temperature, and number of layers) on resin flow as measured by the Kozeny constant and the bulk modulus. The Kozeny constant obtained was between 0.0205 and 0.107. It was found to depend on the consolidation pressure, temperature, number of layers, and their interactions at a 99% confidence level. The value of the bulk modulus was found to be between 1.21 MPa (175 psi) and 8.58 MPa (1244 psi). It also was found to depend on the temperature, pressure, number of plies, and their interactions at a 99% confidence level. These results show the critical effects of fiber orientation on resin flow during processing.Keywords
This publication has 4 references indexed in Scilit:
- The Consolidation of Laminate CompositesJournal of Composite Materials, 1987
- A model for resin flow during composite processing: Part 1—general mathematical developmentPolymer Composites, 1987
- Curing of Epoxy Matrix CompositesJournal of Composite Materials, 1983
- Liquid flow through aligned fiber bedsPolymer Engineering & Science, 1974