Point-Line Conductive Networks via Carbon Black/Multi-Walled Carbon Nanotube Hybrid Fillers and Surfactant Modification in Silicone Rubber Electromagnetic Shielding Composites
Open Access
Abstract
Constructing efficient conductive networks in flexible polymer matrices remains a central challenge in electromagnetic interference (EMI) shielding material design. In this work, a ‘point-line’ hybrid filler system combining conductive carbon black (CB) and multi-walled carbon nanotubes (MWCNTs) was incorporated into a silicone rubber matrix to systematically engineer the conductive network architecture. By optimising the CB/MWCNT blending ratio, a composite with a tensile strength of 8.5 MPa, elongation at break of 180%, and EMI shielding effectiveness of 50 dB was achieved at a 1:1 weight ratio. Further surface modification of the hybrid fillers using five surfactants, including sodium dodecylbenzene sulfonate (SDBS), cetyltrimethylammonium bromide (CTAB), polyvinylpyrrolidone (PVP), nonylphenol ethoxylate (NPEO), and octylphenol ethoxylate (OPEO), was systematically investigated. OPEO modification was proved the most effective, improving EMI shielding performance to 58 dB while enhancing tensile strength by 11.8% and elongation at break by 50%. These results demonstrate that rational filler hybridisation combined with targeted surfactant modification offers a practical and scalable route to high-performance flexible EMI shielding composites.Keywords
Funding Information
- Key Technology Research and Development Program of Shandong Province (2022CXGC020601)
- Key Laboratory of Advanced Rubber Material, Ministry of Education (XJCL2025007)
- Engineering and Physical Sciences Research Council (UKRI1491)
- Royal Society (ES\R1\251127)
This publication has 49 references indexed in Scilit:
- Engineered multi-stage chemical modification of carbon nanotubes: From oxidation and reduction to silane coupling for optimal dispersionApplied Surface Science, 2025
- Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 compositesPolymer Composites, 2024
- Rheological Dependence on Dielectric and Microwave Absorption Properties of Carbon Black/Rubber Nanocomposites Over 6–18 GHzJournal of Electronic Materials, 2024
- Structural Design for EMI Shielding: From Underlying Mechanisms to Common PitfallsAdvanced Materials, 2024
- Design, Processing, and Challenges of Multicomponent Polymer Composites for Improved Electromagnetic Interference Shielding Properties: A ReviewMacromolecular Materials and Engineering, 2024
- Spherical boron nitride/pitch‐based carbon fiber/silicone rubber composites for high thermal conductivity and excellent electromagnetic interference shielding performanceJournal of Applied Polymer Science, 2022
- Recent Advances in Design Strategies and Multifunctionality of Flexible Electromagnetic Interference Shielding MaterialsNano-Micro Letters, 2022
- Covalently functionalized graphene sheets with biocompatible natural amino acidsApplied Surface Science, 2014
- Influence of interphase interactions on electro-optical properties of heterocomposites of 5CB liquid crystal and organomodified montmorillonites doped with carbon nanotubesJournal of Applied Spectroscopy, 2013
- Polymer Brushes via Controlled, Surface‐Initiated Atom Transfer Radical Polymerization (ATRP) from Graphene OxideMacromolecular Rapid Communications, 2010