Investigation of Inter-Turn Short-Circuit Fault of PM Machines Using PWM Voltage-Based Modeling
- 19 May 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (1) , 1324-1334
Abstract
This paper aims to develop an analytical fault model based on PWM voltages for permanent magnet (PM) machines with inter-turn short-circuit fault. Using PWM voltage-based modelling is mainly because the PM machines are commonly driven by PWM inverters. This model is more accurate compared to the ones that use sinewave voltages as inputs as the latter neglect the PWM harmonics in the fault current. However, the investigation in this paper showed that, depending on the DC bus voltage and switching frequency, the PWM harmonic component could be more than 50% of the fundamental component in the fault current, therefore, cannot be neglected. Based on this developed fault model, the characteristics of the fault current have been explored first, which revealed that the back-EMFs mainly contribute to the fundamental component of the fault current, whilst the PWM voltages not only affect its fundamental component but also the PWM harmonics. Secondly, the factors such as DC bus voltage, switching frequency, number of short-circuited turns and different coil connections affecting the PWM ripple components in the phase current and the fault current have also been investigated. Finally, the MATLAB/Simulink simulations based on the developed fault model have been fully validated by a series of tests.Keywords
Funding Information
- OREC Powertrain research Hub
This publication has 25 references indexed in Scilit:
- Diagnosis and Fault-Tolerant Control of Permanent Magnet Synchronous Motors With Interturn Short-Circuit FaultIEEE Transactions on Control Systems Technology, 2023
- Comprehensive Analysis of the AC Copper Loss for High Speed PM Machine With Form-Wound WindingsIEEE Access, 2022
- Mathematical Modeling, Simulation and Experimental Testing of Interior-Mount LSPMSM Under Stator Inter-Turn FaultIEEE Transactions on Energy Conversion, 2018
- Analytical Modeling of Interturn Short Circuit for Multiphase Fault-Tolerant PM Machines With Fractional Slot Concentrated WindingsIEEE Transactions on Industry Applications, 2017
- Optimal Design of IPM Motors With Different Cooling Systems and Winding ConfigurationsIEEE Transactions on Industry Applications, 2016
- Modeling and detection of the short-circuit fault in PMSM using Finite Element AnalysisIFAC-PapersOnLine, 2016
- A review on turn-turn short circuit fault management2015
- A detailed transient model of Interior Permanent Magnet motor accounting for saturation under stator turn fault2013
- Modelling and simulation of stator winding inter‐turn faults in permanent magnet synchronous motorsCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2008
- Finite Element Model for the Study of Inter-Turn Short Circuits in Induction Motors2007