Combining Ray Tracing and Cfd to Evaluate the Outlet Air Temperature of an Indirectly Irradiated Solar Receiver Equipped with a 3d-Cpc for a Solar Tower Power Plant
This study evaluates the outlet air temperature of a receiver equipped a 3D-CPC for a STPP. CFD is used to simulate the heat transfer associated with absorbed solar rays to the air flowing through the receiver. The heliostat field, the tower, the 3D-CPC and the receiver are sized for an electrical power of 30 kW. Optical simulations coupled with solar irradiation conditions are modelled using SolTrace. The optical model developed is validated by simulating the PS-10 heliostat. The CFD model is validated by simulated the Weizmann plant. A heat source is created from the solar rays concentrated by the 3D-CPC truncated to the gridded receiver. This heat source is implemented as a volumetric heat source in Ansys Fluent by developed UDFs. The results showed that the solar field is consisted of 175 heliostats of 2 m 2 surface area and 1.5 m height each. The 3D-CPC truncated at 35° increased the concentration ratio by a factor of 4.91 for an efficiency of 80.66%. The maximum temperature found on the heated solid is 1063 K. For a porosity of 56.02% and a mass flow rate of 0.11 kg/s, an outlet air temperature of 1218 K is reached at the receiver outlet.