Effect of Nitrogen Ratio in Sputtering on the Quality of Film Formation and Electron Emission Properties of Nitride Films
Open Access
Abstract
Nitride films such as tantalum nitride (TaN), titanium nitride (TiN) and boron nitride (BN) are widely used in aerospace and vacuum electronics. The electron emitting properties of these nitride films are of great interest due to the phenomenon of surface electron emission when the films are irradiated, leading to surface modification. In this study, we have prepared three kinds of thin films, TaN, TiN and BN, by sputtering. Then the effect of the nitrogen component on the film formation quality and the dependence of the electron emission coefficient (EEC) on the film’s physical properties were investigated. The results of elemental analysis show that by rising the nitrogen gas flow during sputtering, the N elemental ratios inside the TaN and TiN films can be increased, and the film resistivity decreases follow, while BN films do not show such a tunable characteristic of the elemental ratios or resistivity. The conductivity test results show that TaN and TiN films exhibit conductive properties like those of semiconductor materials. The proportion of N elements inside the films has a significant effect on the film conductivity, namely, the conductivity of the film shows an upward trend with the increase in the proportion of N elements. The EEC test shows that TaN and TiN films with good conductive properties have relatively low EEC values, which are generally lower than 2.10. For TaN and TiN, the test results show that the EEC decreases with the increase of the conductivity. The EEC peak values are 1.92 and 1.56 for TaN and TiN films when their resistivities are 1.45 × 10−5 Ω·m and 7.26 × 10−6 Ω·m, respectively. The EEC values of BN are larger than TaN and TiN, with an EEC peak value higher than 2.49, and the electron energy to obtain the peak value is about 250 eV. The results are instructive for revealing the electron emission regularity of nitride thin films.Keywords
Funding Information
- Project of Science and Technology Research Program of Chongqing Education Commission of China (KJQN202303210, KJQN202403217, 62101434)
- National Natural Science Foundation of China (KJQN202303210, KJQN202403217, 62101434)
This publication has 34 references indexed in Scilit:
- Discharge characteristics of the planar microscale gap electrodes with various geometry structures in the atmosphere environmentResults in Physics, 2024
- Recent progress and perspectives of space electric propulsion systems based on smart nanomaterialsNature Communications, 2018
- Corrosion mechanism in PVD deposited nano-scale titanium nitride thin film with intercalated titanium for protecting the surface of siliconElectrochimica Acta, 2018
- Photoelectrocatalytic Water Splitting: Significance of Cocatalysts, Electrolyte, and InterfacesACS Catalysis, 2016
- Electronic and pseudomagnetic properties of hybrid carbon/boron-nitride nanomaterials via ab-initio calculations and elasticity theoryCarbon, 2016
- Vertically Aligned Ta3N5 Nanorod Arrays for Solar‐Driven Photoelectrochemical Water SplittingAdvanced Materials, 2012
- Estimation of surface charges on dielectric materials for high power rf windowsApplied Surface Science, 2009
- UHV reactive evaporation growth of titanium nitride thin films, looking for multipactor effect suppression in space applicationsVacuum, 2007
- Surface characteristics and electrical breakdown of alumina materialsVacuum, 2007
- Secondary electron emission yields from PEP-II accelerator materialsNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2001