Measurement of the Convective Heat Transfer Coefficient and Temperature of Vehicle-Integrated Photovoltaic Modules
Open Access
Abstract
To improve the thermal design of vehicle-integrated photovoltaic (VIPV) modules, this study clarifies the characteristics of the convective heat transfer coefficient h between the vehicle roof surface and the surrounding air with respect to vehicle speed. Experiments on two types of vehicles with different body shapes indicate that h is strongly affected by vehicle speed, and it is also affected by body shape depending on the position on the roof. Empirical equations for approximating h as a function of vehicle speed and position on the vehicle roof are derived from the experimental datasets, and the differences between the equations derived herein and traditional equations that have been used for the heat transfer analysis of conventional stationary photovoltaic (PV) modules are clarified. Furthermore, the temperature change characteristics of the VIPV module were measured experimentally, confirming that h is the dominant factor causing the high temperature change rate of the VIPV module under driving conditions. In sunny summer conditions, the measured temperature change rate reaches up to 16.5 °C/min, which is approximately 10 times greater than that in the standard temperature cycle test for conventional stationary PV modules.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization (JPNP20015)
This publication has 29 references indexed in Scilit:
- Quantitative evaluation of spatio-temporal heat transfer to a turbulent air flow using a heated thin-foilInternational Journal of Heat and Mass Transfer, 2013
- Temperature Dependent Photovoltaic (PV) Efficiency and Its Effect on PV Production in the World – A ReviewEnergy Procedia, 2013
- Analysis of degradation mechanisms of crystalline silicon PV modules after 12 years of operation in Southern EuropeProgress in Photovoltaics: Research and Applications, 2011
- Large eddy simulation on the unsteady aerodynamic response of a road vehicle in transient crosswindsInternational Journal of Heat and Fluid Flow, 2010
- A thermal model for photovoltaic panels under varying atmospheric conditionsApplied Thermal Engineering, 2010
- Studies of air-flow and temperature fields inside a passenger compartment for improving thermal comfort and saving energy. Part I: Test/numerical model and validationApplied Thermal Engineering, 2009
- On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlationsSolar Energy, 2009
- A survey of wind convection coefficient correlations for building envelope energy systems’ modelingApplied Thermal Engineering, 2008
- Computation of thermal comfort inside a passenger car compartmentApplied Thermal Engineering, 2006
- Heat Transfer During Wind Flow over Rectangular Bodies in the Natural EnvironmentJournal of Heat Transfer, 1981