Mechanically and Chemically Robust Sandwich-Structured C@Si@C Nanotube Array Li-Ion Battery Anodes
Authors:
- Jinyun LiuJLJinyun Liu
- Nan LiNLNan Li
- Matthew D. GoodmanMGMatthew D. Goodman
- Hui Gang ZhangHZHui Gang Zhang
- Eric S. EpsteinEEEric S. Epstein
- Bo HuangBHBo Huang
- Zeng PanZPZeng Pan
- Jinwoo KimJKJinwoo Kim
- K. Jimmy HsiaKHK. Jimmy Hsia
- 4 February 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 9 (2) , 1985-1994
Abstract
Stability and high energy densities are essential qualities for emerging battery electrodes. Because of its high specific capacity, silicon has been considered a promising anode candidate. However, the several-fold volume changes during lithiation and delithiation leads to fractures and continuous formation of an unstable solid-electrolyte interphase (SEI) layer, resulting in rapid capacity decay. Here, we present a carbon–silicon–carbon (C@Si@C) nanotube sandwich structure that addresses the mechanical and chemical stability issues commonly associated with Si anodes. The C@Si@C nanotube array exhibits a capacity of ∼2200 mAh g–1 (∼750 mAh cm–3), which significantly exceeds that of a commercial graphite anode, and a nearly constant Coulombic efficiency of ∼98% over 60 cycles. In addition, the C@Si@C nanotube array gives much better capacity and structure stability compared to the Si nanotubes without carbon coatings, the ZnO@C@Si@C nanorods, a Si thin film on Ni foam, and C@Si and Si@C nanotubes. In situ SEM during cycling shows that the tubes expand both inward and outward upon lithiation, as well as elongate, and then revert back to their initial size and shape after delithiation, suggesting stability during volume changes. The mechanical modeling indicates the overall plastic strain in a nanotube is much less than in a nanorod, which may significantly reduce low-cycle fatigue. The sandwich-structured nanotube design is quite general, and may serve as a guide for many emerging anode and cathode systems.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2011CB933700)
- Basic Energy Sciences (DE-FG02-07ER46471)
This publication has 54 references indexed in Scilit:
- Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticlesNature Communications, 2013
- Surface effects on the structure and lithium behavior in lithiated silicon: A first principles studySurface Science, 2013
- Silicon-Based Hybrid Energy Cell for Self-Powered Electrodegradation and Personal ElectronicsACS Nano, 2013
- Study of lithiation mechanisms in silicon electrodes by Auger Electron SpectroscopyJournal of Materials Chemistry A, 2013
- Orientation-Dependent Interfacial Mobility Governs the Anisotropic Swelling in Lithiated Silicon NanowiresNano Letters, 2012
- Fracture of crystalline silicon nanopillars during electrochemical lithium insertionProceedings of the National Academy of Sciences, 2012
- Tracking lithium transport and electrochemical reactions in nanoparticlesNature Communications, 2012
- Surface-modified silicon nanowire anodes for lithium-ion batteriesJournal of Power Sources, 2011
- Mo3Sb7–C Composite Anodes for Lithium-Ion BatteriesThe Journal of Physical Chemistry C, 2011
- Strain Anisotropies and Self‐Limiting Capacities in Single‐Crystalline 3D Silicon Microstructures: Models for High Energy Density Lithium‐Ion Battery AnodesAdvanced Functional Materials, 2011