Effect of Magnesium Addition on Processing the Al-0.8 Mg-0.7 Si/SiCp Metal Matrix Composites
Authors:
- 28 August 2015
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 787, 553-557
Abstract
Metal matrix composites (MMCs) play a vital role in today’s engineering industries. Stir casting is one of the most inexpensive methods for the production of particulate reinforced metal matrix composites. However there are few problems encountered in stir casting such as the problem of poor wettability of the reinforcement particles in the matrix metal. The reinforcement particles have the tendency to either settle at the bottom of the crucible or they tend to float at the top of molten metal. This is due to the greater surface tension of the molten metal. Various techniques are available to improve the wettability of the ceramic particles in metal matrix which includes Particle treatment, Particle coating and Addition of alloying agent. In this work, Magnesium (Mg) was used as the alloying element to improve the wettability of SiC particles in the Al matrix. Mg is used to reduce the surface tension of molten aluminum (Al) thus promoting proper wetting. To understand the effect of Mg on improving the wettability of SiC in aluminum matrix, different weight percentages of SiC particles reinforced aluminum alloy 6061(AA6061) based MMCs were fabricated in stir casting method by adding Mg as alloying element. The cast specimens were subjected to microstructural analysis, tension tests and hardness tests. Results showed that addition of Mg with SiC in AA6061 matrix significantly improved the wetting between Al and SiC; subsequently MMCs possessed enhanced mechanical properties.Keywords
This publication has 10 references indexed in Scilit:
- The Production of Cast Metal Matrix Composite by a Modified Stir Casting MethodJurnal Teknologi (Sciences & Engineering), 2012
- Optimization of mixing parameters through a water model for metal matrix composites synthesisMaterials & Design (1980-2015), 2007
- Influence of stirring speed and stirring time on distribution of particles in cast metal matrix compositeJournal of Materials Processing Technology, 2006
- Preparation and some properties of SiC particle reinforced aluminium alloy compositesMaterials & Design (1980-2015), 2003
- An analysis of impeller parameters for aluminium metal matrix composites synthesisMaterials & Design (1980-2015), 2002
- Particle distribution in cast metal matrix composites—Part IJournal of Materials Processing Technology, 2002
- Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical propertiesMaterials Science and Engineering: A, 2002
- The wettability of SiC particles by molten aluminium alloyJournal of Materials Processing Technology, 2001
- The enhancement of wettability of SiC particles in cast aluminium matrix compositesJournal of Materials Processing Technology, 2001
- Metal matrix composites: production by the stir casting methodJournal of Materials Processing Technology, 1999