Knock Erosion in Spark-Ignition Engines
Authors:
- 1 October 1996
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The traditional philosophy that all knocking combustion is damaging has caused engine and fuel manufactures to operated with large “safety” margins, incurring both fuel production and consumption costs. This paper describes an attempt to relate knocking conditions to erosion damage. One of the goals was to discover a measurable knock intensity parameter which describes the propensity of knock to cause erosion damage. An experimental technique was developed in which test specimens were subjected to controlled knocking conditions in the combustion chamber of a modified engine. A photographic method was employed to measure the relative level of erosion on the test specimens. This methodology was used to determine the effect of fuel type and operating conditions on knock-induced erosion. It was confirmed that the geometry as well as the temperature played a considerable role in the damage mechanism. The data from these tests showed no correlation between the classical knock intensity criteria (i.e.: peak-to-peak pressure amplitude) and the measured erosion damage. This result was understood as an indication that the classical knock intensities are a measure of the global aftermath of knocking combustion, which is not directly related to the local condition in the end-gas crevices during the auto-ignition-detonation process. This was confirmed by a stress calculation applied to bent specimens, which revealed the existence of local pressure differences of greater than 350 bar. This is many times greater than that recorded by the pressure transducers. The erosion test results showed that the cylinder pressure at the point of auto-ignition was correlated to the measured erosion damage. It was concluded that the strength of the developing-detonation process in the crevice region was strongly related to the initial conditions in the end-gas prior to auto-ignition. Microscopy revealed that knock damage is accompanied by the development and propagation of micro-cracks within the erosion zones. This work now provides a means of measuring the knock-erosion potential and not simply the knock intensity.Keywords
This publication has 12 references indexed in Scilit:
- Knock Erosion in Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1996
- Knock Damage Mechanisms in Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1994
- Surface erosion by high-speed combustion wavesSymposium (International) on Combustion, 1994
- Detection of Knocking Combustion Using Simultaneously High-Speed Schlieren Cinematography and Multi Optical Fiber TechniqueSAE International Journal of Advances and Current Practices in Mobility, 1991
- Theoretical and Experimental Investigation of Knock Induced Surface DestructionSAE International Journal of Advances and Current Practices in Mobility, 1990
- A review of experimental studies of knock chemistry in enginesProgress in Energy and Combustion Science, 1990
- A Fast Data-Acquisition System for Investigating Combustion Phenomena in Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1984
- Analysis of Local Pressures, Surface Temperatures and Engine Damages under Knock ConditionsSAE International Journal of Advances and Current Practices in Mobility, 1983
- Thermal Loading of a Petrol EngineProceedings of the Institution of Mechanical Engineers, 1973
- Investigations on gaseous explosions. Part II. Explosive reactions considered in reference to internal combustion engines. Introductory surveyTransactions of the Faraday Society, 1926