Study of Gas Film Characteristics in Electrochemical Discharge Machining and Their Effects on Discharge Energy Distribution
Open Access
- 20 May 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (5) , 1079
Abstract
Glass is a hard and brittle insulating material that is widely used in optics, biomedicine, and microelectromechanical systems. The electrochemical discharge process, which involves an effective microfabrication technology for insulating hard and brittle materials, can be used to perform effective microstructural processing on glass. The gas film is the most important medium in this process, and its quality is an important factor in the formation of good surface microstructures. This study focuses on the gas film properties and their influence on the discharge energy distribution. In this study, a complete factorial design of experiments (DOE) was used, with three factors and three levels of voltage, duty cycle, and frequency as the influencing factors and gas film thickness as the response for the experimental study, to obtain the best combination of process parameters that would result in the best gas film quality. In addition, experiments and simulations of microhole processing on two types of glass, quartz glass and K9 optical glass, were conducted for the first time to characterize the discharge energy distribution of the gas film based on the radial overcut, depth-to-diameter ratio, and roundness error, and to analyze the gas film characteristics and their effects on the discharge energy distribution. The experimental results demonstrated the optimal combination of process parameters, at a voltage of 50 V, a frequency of 20 kHz and a duty cycle of 80%, that achieved a better gas film quality and a more uniform discharge energy distribution. A thin and stable gas film with a thickness of 189 m was obtained with the optimal combination of parameters, which was 149 m less than the extreme combination of parameters (60 V, 25 kHz, 60%). These studies resulted in an 81 m reduction in radial overcut, a roundness error reduced by 14, and a 49% increase in the depth–shallow ratio for a microhole machined on quartz glass.
Keywords
Funding Information
- National Natural Science Foundation of China (516650556)
This publication has 19 references indexed in Scilit:
- Study of gas film characterization and its effect in electrochemical discharge machiningPrecision Engineering, 2018
- Laser Ablation and Laser-Hybrid Ablation Processes: A ReviewMaterials and Manufacturing Processes, 2015
- Investigation of Optimal Air-Driving Fluid Jet Polishing Parameters for the Surface Finish of N-BK7 Optical GlassJournal of Manufacturing Science and Engineering, 2013
- Processing of Foturan® glass ceramic substrates for micro-solid oxide fuel cellsJournal of the European Ceramic Society, 2012
- Study of gas film quality in electrochemical discharge machiningInternational Journal of Machine Tools and Manufacture, 2010
- The fabrication of microfluidic structures by means of full-wafer adhesive bonding using a poly(dimethylsiloxane) catalystJournal of Micromechanics and Microengineering, 2007
- Physical principles and miniaturization of spark assisted chemical engraving (SACE)Journal of Micromechanics and Microengineering, 2005
- A model for electrode effects using percolation theoryElectrochimica Acta, 2004
- Hard and soft micromachining for BioMEMS: review of techniques and examples of applications in microfluidics and drug deliveryAdvanced Drug Delivery Reviews, 2004
- Experiments with the light of the voltaic arcJournal of the Franklin Institute, 1849