Highly Sensitive Balloon-Like Temperature Fiber Sensor Based on a Seven-Core Fiber
- 24 April 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (12) , 688-691
Abstract
A high sensitivity fiber sensor constructed by cascading a seven-core fiber (SCF) with a balloon-like bending single-mode fiber (BSF) is proposed and demonstrated. Due to the composite structure, more higher-order modes can be stimulated from the core mode than the conventional BSF, leading to a high temperature sensitivity of the sensor. Experimental results show that when the temperature varies from 31 °C to 70 °C, the maximum temperature sensitivity of the sensor can reach -3.22 nm/°C, which is the highest as far as the BSF sensor is concerned. By decreasing SCF’s length and BSF’s diameter, the temperature sensitivity of the sensor will be increased. Furthermore, the sensor is insensitive to the change of the refractive index (RI), which successfully avoids the problem of cross-sensitivity in practical applications of temperature and RI detection.Keywords
Funding Information
- Six Talent Peaks Project in Jiangsu Province (KTHY-052)
- Science and Technology Program of Nantong (JC2021037)
- Key Laboratory of Advanced Optical Manufacturing Technologies of Jiangsu Province and the Key Laboratory of Modern Optical Technologies of Education Ministry of China, Soochow University (KJS1858)
- State Key Laboratory of Advanced Optical Communication Systems Networks, China (2021GZKF006)
This publication has 14 references indexed in Scilit:
- In-Line Hybrid Fiber Sensor for Curvature and Temperature MeasurementIEEE Photonics Journal, 2019
- Simultaneous measurement of micro-displacement and temperature based on balloon-like interferometer and fiber Bragg gratingOptik, 2019
- Integrated FPI-FBG composite all-fiber sensor for simultaneous measurement of liquid refractive index and temperatureOptics and Lasers in Engineering, 2018
- Femtosecond laser inscribed straight waveguide in no-core fiber for in-line Mach–Zehnder interferometer constructionOptics Letters, 2018
- A high sensitivity temperature sensor based on balloon-shaped bent SMF structure with its original polymer coatingMeasurement Science and Technology, 2018
- Humidity sensor based on unsymmetrical U-shaped microfiber with a polyvinyl alcohol overlaySensors and Actuators B: Chemical, 2018
- All-fiber multipath Mach⬜Zehnder interferometer based on a four-core fiber for sensing applicationsSensors and Actuators A: Physical, 2016
- Temperature Sensor Based on Fiber Ring Laser With Sagnac LoopIEEE Photonics Technology Letters, 2016
- Bent SMS fibre structure for temperature measurementElectronics Letters, 2010
- Improved Bend Loss Formula Verified for Optical Fiber by Simulation and ExperimentIEEE Journal of Quantum Electronics, 2007