Solution Synthesis of Iodine-Doped Red Phosphorus Nanoparticles for Lithium-Ion Battery Anodes
Authors:
- 12 January 2017
- journal article
- letter
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 17 (2) , 1240-1247
Abstract
Red phosphorus (RP) is a promising anode material for lithium-ion batteries due to its earth abundance and a high theoretical capacity of 2596 mA h g–1. Although RP-based anodes for lithium-ion batteries have been reported, they were all in the form of carbon–P composites, including P–graphene, P–graphite, P–carbon nanotubes (CNTs), and P–carbon black, to improve P’s extremely low conductivity and large volume change during cycling process. Here, we report the large-scale synthesis of red phosphorus nanoparticles (RPNPs) with sizes ranging from 100 to 200 nm by reacting PI3 with ethylene glycol in the presence of cetyltrimethylammonium bromide (CTAB) in ambient environment. Unlike the insulator behavior of commercial RP (conductivity of –12 S m–1), the conductivity of RPNPs is between 2.62 × 10–3 and 1.81 × 10–2 S m–1, which is close to that of semiconductor germanium (1.02 × 10–2 S m–1), and 2 orders of magnitude higher than silicon (5.35 × 10–4 S m–1). Around 3–5 wt % of iodine-doping was found in RPNPs, which was speculated as the key to significantly improve the conductivity of RPNPs. The significantly improved conductivity of RPNPs and their uniform colloidal nanostructures enable them to be used solely as active materials for LIBs anodes. The RPNPs electrodes exhibit a high specific capacity of 1700 mA h g–1 (0.2 C after 100 cycles, 1 C = 2000 mA g–1), long cycling life (∼900 mA h g–1 after 500 cycles at 1 C), and outstanding rate capability (175 mA h g–1 at the charge current density of 120 A g–1, 60 C). Moreover, as a proof-of-concept example, pouch-type full cells using RPNPs anodes and Li(Ni0.5Co0.3Mn0.2)O2 (NCM-532) cathodes were assembled to show their practical uses.Keywords
Funding Information
- National Science Council (NSC 102-2221-E-007-023-MY3)
- Ministry of Science and Technology, Taiwan (MOST 102-2633-M-007-002, MOST 103-2221-E-007-089-MY3, MOST 103-2622- E-007-025)
This publication has 48 references indexed in Scilit:
- A solid future for battery developmentNature Energy, 2016
- Promises and challenges of nanomaterials for lithium-based rechargeable batteriesNature Energy, 2016
- Germanium‐Based Nanomaterials for Rechargeable BatteriesAngewandte Chemie International Edition, 2016
- A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodesNature Nanotechnology, 2014
- High-Performance Germanium Nanowire-Based Lithium-Ion Battery Anodes Extending over 1000 Cycles Through in Situ Formation of a Continuous Porous NetworkNano Letters, 2014
- Lithium Ion Battery Peformance of Silicon Nanowires with Carbon SkinACS Nano, 2013
- High capacity lithium ion battery anodes of silicon and germaniumCurrent Opinion in Chemical Engineering, 2013
- A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy AnodesNano Letters, 2012
- Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase controlNature Nanotechnology, 2012
- Nanostructured silicon for high capacity lithium battery anodesEnergy & Environmental Science, 2010