Sensorial Surfaces-Embedding Sensor Structures Into the Surface of Materials
Authors:
- 7 November 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 14 (7) , 2078-2083
Abstract
This paper describes the concept of sensorial surfaces in contrast to thin film or conventional microsensors. Examples for their application in the monitoring of bearings and hot or cold forming processes are given. Two manufacturing processes to embed the sensor structures into the surface of the part to be monitored are developed. The embedding makes the sensor structures less prone to failure caused by high mechanical loads. Sensorial surfaces consist of a thin-film layer package made from insulating and conductive layers. The first process embeds the sensor structure into the insulating layer of the layer package. Electrochemical micromachining is used for the second process and the 3-D structure of a strain gauge is manufactured 45 μm deep into hardened 100Cr6 steel in <;10 s. This makes the process significantly faster than conventional photolithography and etching or laser processes with virtually no thermal stress on the workpiece.Keywords
Funding Information
- Federal State and University of Bremen in the framework of the Integrated Solutions in Sensorial Structure Engineering
- Sensorial Materials Scientific Centre (54 416 910)
This publication has 13 references indexed in Scilit:
- In Situ Detection of Forging Defects without Sensors in the Forging ToolMaterials Science Forum, 2013
- Influence of the electrode distance and metal ion concentration on the resulting structure in electrochemical micromachining with structured counter electrodesInternational Journal of Machine Tools and Manufacture, 2013
- Development of a strain sensor for rolling contact loads2011
- Novel measurement and monitoring system for forming processes based on piezoresistive thin film systemsMicrosystem Technologies, 2010
- Process monitoring and closed loop controlled processArchives of Civil and Mechanical Engineering, 2009
- Fabrication of micro- and nano-structured materials using mask-less processesJournal of Physics D: Applied Physics, 2007
- Multifunctional thin film sensors based on amorphous diamond-like carbon for use in tribological applicationsThin Solid Films, 2006
- Micro force sensor with piezoresistive amorphous carbon strain gaugeSensors and Actuators A: Physical, 2006
- Thermal stability and oxidation properties of magnetron sputtered diamond-like carbon and its nanocomposite coatingsDiamond and Related Materials, 2006
- Oxidation behavior of diamond-like carbon filmsSurface and Coatings Technology, 1999