Melting behavior and isothermal crystallization kinetics of polypropylene/metallocene‐catalyzed polyethylene elastomer blends
Authors:
- 22 August 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 110 (5) , 2615-2622
Abstract
Polypropylene (PP)/metallocene‐catalyzed polyethylene elastomer (mPE) blends were prepared in a twin‐screw extruder. The melting behavior, crystallization behavior, and isothermal crystallization kinetics of the blends were studied with differential scanning calorimetry. The results showed that PP and mPE were partially miscible and that the addition of mPE shifted the melting peak of PP to a lower temperature but the crystallization temperature to a higher temperature, demonstrating a dilution effect of mPE on PP. The isothermal crystallization kinetics of the blends were described with the Avrami equation. The values of the Avrami exponent indicated that the nucleation mechanism of the blends was heterogeneous, the growth of spherulites was almost three‐dimensional, and the crystallization mechanism of PP was not affected much by mPE. At the same time, the Avrami exponents of the blends were higher than that of pure PP, and this showed that the addition of mPE helped PP to form more perfect spherulites. The crystallization rate of PP was increased by mPE because the dilution effect of mPE on PP increased the mobility of PP chains. The crystallization activation energy was estimated with the Arrhenius equation, and the nucleation constant was determined by the Hoffman–Lauritzen theory. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 29 references indexed in Scilit:
- Polypropylene/polyamide 6/polyethylene-octene elastomer blends. Part 3. Mechanisms of volume dilatation during plastic deformation under uniaxial tensionPolymer, 2005
- Toughening of polypropylene with styrene/ethylene‐butylene/styrene triblock copolymer: Effects of reactive and nonreactive compatibilizationJournal of Applied Polymer Science, 2003
- Mechanical properties and morphologies of PP/mPE/filler compositesJournal of Applied Polymer Science, 2002
- Tensile elongation of high‐fluid polypropylene/ethylene–propylene rubber blends: Dependence on molecular weight of the components and propylene content of the rubberJournal of Applied Polymer Science, 2001
- Isothermal crystallization and spherulite structure of partially miscible polypropylene–linear low‐density polyethylene blendsJournal of Applied Polymer Science, 2001
- An investigation on the impact fracture characteristics of EPR toughened polypropylenePolymer Testing, 1996
- Quiescent polymer crystallization: Modelling and measurementsPolymer Engineering & Science, 1994
- Rheological properties and crystalline structure of the dynamically cured EPDM and PP/HDPE ternary blendsJournal of Applied Polymer Science, 1988
- Mechanical properties and morphology of isotactic polypropylene/ethylene-propylene copolymer blendsPolymer, 1987
- Heat and entropy of fusion of polypropyleneJournal of Applied Polymer Science, 1964