Contribution to the development of colorimetry as a method for the assessment of fire-damaged concrete
- 6 February 2014
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- p. 1-15
Abstract
This study presents a new method of using colorimetry for post-fire assessment of concrete. Changes in concrete colour with temperature are related to chemical changes of cement and aggregates. Two concretes were studied: an ordinary concrete (OC) and a high-performance concrete (HPC). The difference between both concretes was the water–cement ratio. They were made with the same cement and the same riverbed aggregates. Small samples were heated with different target temperatures: 100, 200 ... 1000 °C. After each cooling period, a picture was taken with a flatbed scanner. Two types of colour image decomposition were then used: RGB (red, green and blue) and HSI (hue, saturation and intensity) to analyse the evolution of the colour of the concrete with temperature. The evolution of red, green and blue components with temperature was analysed and two parameters of colorimetric analysis in order to predict the maximum temperature reached by concrete during fire were proposed. As the results have shown, the blue colour histogram gradually widens at its base as the temperature increases. Parameter of colorimetric analysis 1 is the measurement of this width. Parameter of colorimetric analysis 2 is associated with the appearance of very light colours beyond 800 °C. Thus, the number of pixels with intensity of red or green or blue higher than 225 increases very significantly between 800 and 900 C. Parameter of colorimetric analysis 3 is the average hue of the image (in the HSI colour space). It was found that parameter of colorimetric analysis 3 decreases significantly with temperature. This corresponds to the reddening of concrete with temperature due to the oxidation of mineral containing iron. To validate the use of these parameters of colorimetric analysis for the post-fire analysis of concrete, small concrete slabs were heated. They were positioned in place of the oven door, thus providing a thermal gradient through their thickness. Images taken during the cooling process were analysed using the proposed parameters of colorimetric analysis.Keywords
This publication has 10 references indexed in Scilit:
- Behaviour of cement concrete at high temperatureBulletin Of The Polish Academy Of Sciences-Technical Sciences, 2013
- Colour Change in Heated ConcreteFire Technology, 2013
- Methods to quantify the colour development of concrete exposed to fireConstruction and Building Materials, 2011
- Assessment Methods of Fire Damages in Concrete Tunnel LiningsFire Technology, 2011
- Revealing the temperature history in concrete after fire exposure by microscopic analysisCement and Concrete Research, 2009
- Multi-focus color image fusion in the HSI space using the sum-modified-laplacian and a coarse edge mapImage and Vision Computing, 2008
- Study the surface color of sewage sludge mortar at high temperatureConstruction and Building Materials, 2007
- Compressive strength–color change relation in mortars at high temperatureCement and Concrete Research, 2004
- Assessment of fire damaged concrete using colour image analysisConstruction and Building Materials, 2001
- Compressive strength for service and accident conditionsMaterials and Structures, 1995