Modelling the Environmental Degradation of the Interface in Adhesively Bonded Joints using a Cohesive Zone Approach
- 1 November 2006
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 82 (11) , 1061-1089
Abstract
The use of a cohesive zone model (CZM) to predict the long-term durability of adhesively bonded structures exposed to humid environments has been investigated. The joints were exposed to high relative humidity (RH) environments and immersion in both tap and deionised water for up to a year before quasi-static testing to failure. Both stressed and unstressed conditions during aging were considered. The degradation was faster for the stressed joints and for those joints immersed in the more corrosive environments. Two mechanisms were suggested to explain this behaviour: cathodic delamination and stress-enhanced degradation. In the model, the cohesive zone parameters determine the residual strength of the joints. The degradation of these parameters was, in the first instance, related directly to the moisture concentration. The model was then extended to include degradation due to stress and more corrosive environments. Good correlation between the numerical modelling and the experimental results was obtained.Keywords
This publication has 33 references indexed in Scilit:
- Characterization and modeling of strain assisted diffusion in an epoxy adhesive layerInternational Journal of Solids and Structures, 2006
- CRACK GROWTH OF STRUCTURAL ADHESIVE JOINTS IN HUMID ENVIRONMENTSThe Journal of Adhesion, 2004
- Moisture durability of four moisture cure urethane adhesivesJournal of Adhesion Science and Technology, 2002
- A Spectroscopic Technique for Studies of Water Transport Along the Interface and Hydrolytic Stability of Polymer/Substrate SystemsThe Journal of Adhesion, 1999
- Measurement of adhesive joint fracture properties as a function of environmental degradationInternational Journal of Adhesion and Adhesives, 1998
- Long-term durability in water of aluminium alloy adhesive joints bonded with epoxy adhesivesInternational Journal of Adhesion and Adhesives, 1997
- Test of a model of stress-dependent diffusion by means of combined colored tracer and birefringence profile measurementsJournal of Polymer Science Part B: Polymer Physics, 1988
- Free-volume dependent moisture diffusion under stress in composite materialsJournal of Materials Science, 1986
- A Model for Predicting Joint DurabilityThe Journal of Adhesion, 1980
- Environmental Failure of Structural Adhesive JointsThe Journal of Adhesion, 1974