Demonstrating a duplex TRIP/TWIP titanium alloy via the introduction of metastable retained β-phase
Open Access
- 6 July 2022
- journal article
- other
- Published by Taylor & Francis in Materials Research Letters
- Vol. 10 (11) , 754-761
Abstract
This study demonstrates transformation-induced plasticity (TRIP) in conjunction with twinning-induced plasticity (TWIP) in α β titanium alloys by introducing metastable retained β-phase. By annealing at 850 °C followed by water quenching, metastable retained β-phase (∼25%) was obtained in Ti–6Al–4V alloy. Stress-induced phase transformation in the retained β-phase produced orthorhombic α′′-martensite associated with (021)α′′ twinning, which significantly increased the work-hardening rate and uniform elongation. The findings reveal that the minor retained β-phase is responsible for macroscopic deformation behavior and could aid in novel alloy design that can increase work hardenability with fewer alloying elements than currently available metastable β-titanium alloys. GRAPHICAL ABSTRACT IMPACT STATEMENT The minor metastable retained β-phase in an α β titanium alloy with low alloy content enhanced work hardening because of the combined TRIP/TWIP effect.
Keywords
Funding Information
- Iketani
- Science
- and
- Technology
- Foundation (0291050-A)
- JAPAN
- Titanium
- Society
- Light
- Metal
- Educational
- Foundation
This publication has 44 references indexed in Scilit:
- Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effectsActa Materialia, 2013
- Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austeniteScripta Materialia, 2010
- High-strength nanostructured Ti–12Mo alloy from ductile metastable beta state precursorMaterials Science and Engineering: A, 2010
- General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parametersScripta Materialia, 2006
- Martensitic transformation, shape memory effect and superelasticity of Ti–Nb binary alloysActa Materialia, 2006
- A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steelActa Materialia, 2004
- Titanium Alloys for Aerospace ApplicationsAdvanced Engineering Materials, 2003
- Design and mechanical properties of new β type titanium alloys for implant materialsMaterials Science and Engineering: A, 1998
- Phase transformations during cooling in α+β titanium alloysMaterials Science and Engineering: A, 1998
- Correlation of tensile properties, deformation modes, and phase stability in commercial β-phase titanium alloysMetallurgical Transactions A, 1987