Solution blow spinning: A new method to produce micro‐ and nanofibers from polymer solutions
Top Cited Papers
- 27 April 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 113 (4) , 2322-2330
Abstract
A solution blow spinning technique was developed using elements of both electrospinning and melt blowing technologies as an alternative method for making non‐woven webs of micro‐ and nanofibers with diameters comparable with those made by the electrospinning process with the advantage of having a fiber production rate (measured by the polymer injection rate) several times higher. The diameters of fibers produced ranged from 40 nm for poly(lactic acid) to several micrometers for poly(methyl methacrylate). This solution blow spinning method uses a syringe pump to deliver a polymer solution to an apparatus consisting of concentric nozzles whereby the polymer solution is pumped through the inner nozzle while a constant, high velocity gas flow is sustained through the outer nozzle. Analysis of the process showed that pressure difference and shearing at the gas/solution interface jettisoned multiple strands of polymer solution towards a collector. During flight, the solvent component of the strands rapidly evaporates forming a web of micro and nanofibers. The effect of injection rate, gas flow pressure, polymer concentration, working distance, and protrusion distance of the inner nozzle was investigated. Polymer type and concentration had a greater effect on fiber diameter than the other parameters tested. Injection rate, gas flow pressure, and working distance affected fiber production rate and/or fiber morphology. Fibers were easily formed into yarns of micro‐ and nanofibers or non‐woven films that could be applied directly onto biological tissue or collected in sheets on a rotating drum. Indeed, virtually any type of target could be used for fiber collection. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 26 references indexed in Scilit:
- Effect of relative humidity on the morphology of electrospun polymer fibersCanadian Journal of Chemistry, 2008
- Catalytic activity of electrically deposited platinum nanoparticle catalysts on graphite nanofibersColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Electrospun collagen/chitosan nanofibrous membrane as wound dressingColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Electrospun Porous Mats for High Efficiency FiltrationJournal of Industrial Textiles, 2007
- Biomimetic electrospun nanofibers for tissue regenerationBiomedical Materials, 2006
- Electrospinning of linear homopolymers of poly(methyl methacrylate): exploring relationships between fiber formation, viscosity, molecular weight and concentration in a good solventPolymer, 2005
- Melt-electrospinning part I: processing parameters and geometric propertiesPolymer, 2004
- Attenuating PP/PET bicomponent melt blown microfibersPolymer Engineering & Science, 2003
- The manufacture of continuous polymeric filaments by the melt‐blowing processPolymer Engineering & Science, 1990
- Monilia in the SputumBMJ, 1934